Rode PodMic USB White Studio Bundle: Broadcast Voice in a Coordinated White-Finish Rig

This bundle pairs the white-finish Rode PodMic USB dynamic broadcast microphone with the white-finish Rode PSA-1+ premium parallelogram studio boom arm, a 10-foot balanced XLR cable, and the Rode SC27 6.6-foot SuperSpeed USB-C cable. One purchase delivers the full white-finish desktop rig: a dual-output broadcast mic with onboard APHEX DSP, a flagship boom arm color-matched to the mic, and both XLR and USB-C cabling so the rig works as XLR-into-an-interface or plug-and-play USB.

Dual XLR and USB-C Output — One Mic, Two Workflows

The defining feature of the PodMic USB is that it works both as a broadcast XLR mic into a mixer or audio interface AND as a plug-and-play USB-C mic direct into the host computer. Start over USB-C with no interface required. Add an interface later and the same mic carries on as an XLR broadcast dynamic. Both outputs are active simultaneously — one recording can hit two destinations.

White Finish — Coordinated Mic, Arm, and Aesthetic

The PodMic USB White and PSA-1+ White are designed as a color-matched pair. Creators building a white-finish desktop podcast or streaming rig — for aesthetic on-camera setups, content-creator desks, and visual-brand consistency — finally have the broadcast mic and the flagship boom arm in matching white. Both ship with white hardware to maintain the coordinated look.

Dynamic Cardioid Capsule and Onboard APHEX DSP

The PodMic USB uses a high-power neodymium dynamic capsule. Dynamic capsules reject untreated room reflections that condensers pick up — the tight cardioid pattern keeps the focus on the host voice. Inside the mic, the Revolution Preamp drives the capsule cleanly and the APHEX-powered onboard DSP runs the kind of processing usually reserved for hardware racks — noise gate, compressor, high-pass filter, Aural Exciter, Big Bottom. Configurable through Rode Connect and Rode Central.

PSA-1+ Premium Parallelogram Studio Boom Arm in White

The PSA-1+ is Rode's flagship studio arm. Parallelogram spring design delivers smooth, repeatable mic placement and stays put once positioned. Damped springs operate silently — no creak or rattle picked up by the mic. 940 mm of horizontal reach handles wide podcast setups and accommodates dual-host or guest positioning. Desk mount clamp fits surfaces up to 70 mm thick, and a threaded desk insert option fits surfaces up to 55 mm. Cable channel routes the XLR or USB-C cable cleanly down the arm.

10-Foot Balanced XLR Cable and the SC27 6.6-Foot USB-C Cable

The 10-foot male-to-female 3-pin XLR cable carries the analog XLR signal from the PodMic USB to an audio interface — full shield means common-mode rejection blocks hum, buzz, and RF interference across the entire run. The Rode SC27 6.6-foot SuperSpeed USB-C cable carries the USB digital signal from the mic to the host computer — rated for 5 Gbps SuperSpeed data and 60 W power delivery, fully shielded. Both outputs covered with proper cabling out of the box.

How the Four Components Work Together

The signal chain is intentional and complete. The PodMic USB White captures broadcast-grade voice with onboard APHEX processing. The PSA-1+ White positions the capsule at proper speaking distance and angle with silent, repeatable motion. The 10-foot XLR carries the analog signal to a console or interface. The SC27 carries the USB-C signal to the host computer. The buyer gets the dual-output workflow ready on day one — XLR for the interface chain, USB-C for direct laptop recording — in a coordinated white-finish rig.

Who This Is For

First-timer building a serious white-finish desktop podcast or streaming rig who wants every component in coordinating white. Upgrader replacing a budget mic and tripod stand with broadcast-grade dual-output dynamic sound and a flagship studio boom arm. Spec shopper who wants the PodMic USB's onboard DSP, the PSA-1+'s parallelogram silent operation, full-shielded XLR cabling, and SuperSpeed USB-C reach — the complete white-finish signal chain.