Designed for sax, toms, brass and percussion, the PRO 35 excels in high-SPL applications and is ideal for active stage performances. Its extended frequency response captures subtle nuances of the performance. The included UniMount® clip permits accurate positioning and provides shock resistance while protecting the element. The microphone’s cardioid polar pattern reduces the pickup of sounds from the sides and rear, improving the isolation of the desired sound source.

The PRO35 can also be used for string instruments, such as violins, cellos, and basses.

Includes: AT8418 UniMount® microphone instrument mount; AT8538 power module; soft protective pouch

Features

• UniMount® clip permits accurate positioning, provides shock resistance and protects element
• Cardioid polar pattern reduces pickup of sounds from the sides and rear, improving isolation of desired sound source
• Extended frequency response captures subtle nuances of the performance
• 6' (1.8 m) cable permanently attached to microphone

Specs ELEMENT Fixed-charge back plate, permanently polarized condenser POLAR PATTERN Cardioid FREQUENCY RESPONSE 50-15,000 Hz LOW FREQUENCY ROLL-OFF 80 Hz, 18 dB/octave OPEN CIRCUIT SENSITIVITY -45 dB (5.6 mV) re 1V at 1 Pa IMPEDANCE 250 ohms MAXIMUM INPUT SOUND LEVEL 145 dB SPL, 1 kHz at 1% T.H.D. DYNAMIC RANGE (typical) 115 dB, 1 kHz at Max SPL SIGNAL-TO-NOISE RATIO 64 dB, 1 kHz at 1 Pa PHANTOM POWER REQUIREMENTS 11-52V DC, 2 mA typical SWITCH Flat, roll-off WEIGHT (MICROPHONE) 0.3 oz (8 g) WEIGHT (POWER MODULE) 2.9 oz (81 g) DIMENSIONS (MICROPHONE) 0.98" (25.0 mm) long, 0.40" (10.2 mm) diameter DIMENSIONS (POWER MODULE) 3.66" (92.9 mm) long, 0.74" (18.9 mm) diameter OUTPUT CONNECTOR (POWER MODULE) Integral 3-pin XLRM-type CABLE 6.0' (1.8 m) long (permanently attached to microphone), 0.10" (2.6 mm) diameter, 2-conductor, shielded cable with TA3F-type connector ACCESSORIES FURNISHED AT8418 UniMount® microphone instrument mount; AT8538 power module; soft protective pouch AUDIO-TECHNICA CASE STYLE M12