TRUE Solderless Quick-connect Adapters for Epiphone 5 wire pickup + Screw driver

TRUE Solderless adapter - Screw Terminal Style - Retire your Solder iron.
True Quick-connect Adapters for humbucker Pickups for use in compatible Epiphone guitars.
Note due to high shipping cost from Europe we have had to raise the S/H. We ship either UPS (fast - about 4 days -$50) or postal service (around 10-14 days - $25) Contact us for options. No additional charge for additional items as long as the package is under 4 lbs.

Description:
This adapter will allow you to make connection from your aftermarket pickup to your Epiphone QuickConnects. The screw terminal provides a secure connection once tightened down with a small flat head screwdriver. Pick-up setup is 5 wires (4 coil leads and GND). The outermost Black wire is Ground.
The adapter has holes in the PCB to route the Pickup wires, or alternatively 2 large holes for zip tie use to assure you can secure the wires mechanically.

Typically you want to get rid of the stock pickups and replace them with - say Seymour Duncans or other quality pickups. Replacement pickups typically do not come with connectors, but are left with stripped wires for the end user to connect to his/her setup. With these connectors you can connect directly to the stock connector on the PCB in the guitar, making perfect connections. This way you can still swap out the pickups if you want to try out different combinations of pickups.

These connectors will fit other Epiphone guitars using the 5 pin connector type found on the newer models like the Les Paul. Please do your own research to verify compatibility. If in doubt you are welcome to contact me and I will do my best to advise you.

Included are:

• 2 Screw terminal Solderless Adapters for Epiphone
• Screw driver of the correct size to get the job done
• 2 pcs transparent heat shrink - use to insulate final assembly
• Instruction sheet with color coding reference chart for most used pick-up brands

SUGGESTED PROCESS:  

1. Just Insert wires from Pickup in terminal posts and tighten down It doesn't get any easier than this.
2. Plug the female connector into the potentiometer in your epiphone

Note - please open up the back of your guitar and check that it has the quick connect type setup. If in doubt: Ask before you order!
Shipping: I typically ship the same day as order is received except Sunday. International buyers are welcome, I have shipped several kits to GB, western Europe and Scandinavia. Typical transit time 7-10 days.


Keywords - Epiphone Gibson Probucker Burstbucker Seymour Duncan Pickups Connectors Plug Crimps Solderless Quick QuickConnect Connect Humbucker Electric spare part Crimp tool Di-MArzio EMG SG Bare Knucles D'Urbano

International Buyers – Please Note: 

Import duties, taxes, and charges are not included in the item price or shipping cost. These charges are the buyer's responsibility.

Please check with your country's customs office to determine what these additional costs will be prior to bidding or buying.