Cloud Microphones CL-Z Cloudlifter Variable Z Mic Activator [DEMO]

Cloud Microphones CL-Z Cloudlifter Variable Z Mic Activator

Impedance control and output control for microphones.

The Cloud Microphones CL-Z mic activator uses phantom power from your preamp to solve common problems with dynamic and ribbon microphones, while maximizing signal quality, making it a must-have box for your studio or live toolset. It is designed to be connected between your mic and preamp, maximizing signal quality while driving long cable runs. The direct-coupled, discrete JFET circuitry preserves your signal’s integrity while the CL-Z goes to work.

You get control over the input impedance (to get the best out of any microphone), and a variable output level (+12 to +24dB) so you can drive even the longest cable runs with ease. You even get a variable low-cut filter to clean up your signal before it sees your preamp.

Whether you run live sound or just use a variety of mics on a daily basis in your studio, you’ll love working with the CL-Z mic activator.

The Cloud Microphones CL-Z mic activator’s input features variable impedance from 150 to 15k ohms. Since every microphone is different, and typically sound best at specific input impedances, you can tailor the CL-Z to any mic to get the best performance. And even if your preamp features variable impedance, the CL-Z lets you control this near your microphone.

Sometimes you need a little extra juice to get a quality mic signal to your preamp, especially with long cable runs. The Cloud Microphones CL-Z mic activator makes it easy, adding 12 to 24dB of gain to your signal, while the premium circuitry passes your audio uncolored. It is particularly useful for low-output ribbon and dynamic mics in your studio, and it’s perfect for driving long cable runs from the stage to the board in live sound settings.

The CL-Z from Cloud Microphones is placed between your mic and preamp, giving you access to the additional gain and variable low-cut filter on the CL-Z. In your studio, that makes it easy to optimize your signal before it hits your preamp. Sure, your preamp may have a filter, and maybe even variable impedance, but in many studio layouts, it’s across the room, or even in another room altogether. The CL-Z lets you dial the filter in and maximize your signal for a long cable run, meaning you’ll be hitting your favorite preamp with the best signal possible.

CL-Z Cloudlifter Variable Z Mic Activator Features

• Maximizes your microphone’s signal quality
• Impeccable sonic quality
• Get the best sound from any mic with the variable input impedance
• Low-cut filter variable from 20Hz-250Hz
• Great way to transparently increase the output of ribbon and dynamic mics
• Rugged steel enclosure for excellent shielding and reliability
• Requires +48V phantom power from your preamp