SNK Bludgeon - Hybrid Marshall Amp

Great amp with no issues at all, just not exactly what I was looking for, preferred the VH300 instead! Will come with a hard case as well. [amps description from the SNK website]
THE BLUDGEON HYPRID AMPLIFIER IS A SINGLE CHANNEL TUBE PREAMP WITH FET BOOST AND 300 WATT CLASS D AMPLIFIER.

Not directly based on any standard amplifier but takes inspiration from many Hot Rodded JCM800 and Superlead designs from the 80's and beyond.

A footswitchable LND150 FET boost in front of a marshall-esque preamp utilizing 2 12ax7 vacuum tubes running at real tube voltages followed by a series effects loop, Presence and Resonance controls. Preamp Line Out with the ability to mute the Line Out or Speaker Out. Powered by a 300W Class D amplifier Module.

The Bludgeon is very pedal friendly with and without the input boost activated. Bypassing the input boost when using a higher gain pedal helps to maintain the overall clarity of your signal through the preamp.

There is a 30 second warmup delay timer in place at initial power up that allows the preamp tubes to warm up. Even with the GO! switch in the up position, sound will not pass until after this delay and the status LED will then switch from red to blue. This timer is only re-set after powering the amp off.