ONE very clean (rarely handled) genuine Fulltone criss cross textured thumb screw (FULL Length: 7/16" -- THREADED part is 1/4" long) fits OCD, '69 MKII, 70BC, OF-2, SB-2, Sec Freq & more [NO pedal(s) included] from 2018, Silver, Metal

Up for grabs is ONE very clean (rarely handled) genuine Fulltone criss cross textured thumbscrew. The THREADED Part is 1/4 inch long. FULL Length of the Thumb Screw is 7/16 inch. The Diameter of the Head is 5/16 inch.

The textured criss cross areas of the head are very clean.

The smooth side of the screw head is very clean. It just has a few very light circular lines and the center area has a tiny very light dot bump (from how the humb screw was manufactured).

The treaded part of screw is very clean.

Measurement (see last four pictures):

• Full length is slightly over 7/16 inch -- SEE picture # 6 .
• The threaded part is 1/4 inch - SEE picture # 7.
• Diameter of the Head is 5/16 inch - SEE picture # 8
• The height of the round screw head part is slightly more than 2/16 inch -- SEE picture # 6.

NOTE: Fulltone also made an almost similar thumb screw with a slightly shorter threaded part (it is / was 3/16" long). Therefore - if it matters to you - please check the length of the screws on your Fulltone pedal.

Here 's a REVERB link of the slightly shorter similar style Fulltone thumb screw that I sold a couple of months ago (link provided as a reference):

• https://reverb.com/item/92608506-one-used-light-discoloration-on-criss-cross-pattern-genuine-fulltone-criss-cross-textured-thumb-screw-threaded-part-is-short-it-is-just-under-3-16-inch-fits-ocd-69-mkii-70bc-of-2-sec-freq-more-no-pedal-s-included-from-2017-silver-metal

But in reality the length of the threaded part is very slightly different and this thumb screws will still fit fine if your other thumb screws are 3/16" long.

As I mentioned above - the threaded part 1/4" long. In case you don't know - Fulltone also makes (made) a slightly shorter version of their thumbscrews (3/16") - as seen in the link that I provided above.

This thumbscrew fits:  OCD, '69 MKII, 70BC, Sec Freq, Soul-Bender SB-2, Octafuzz OF-2, 2B Minature, Catalyst, Fat-Boost FB2 & FB-3 pedals. NOTE: not the correct screw for the FB-1 pedal.  (none of these pedals are included in this listing).

==

This thumb screw is specifically from a pre-owned (very lightly used) 2015 Fulltone SB-2 Soul Bender (pedal NOT included). I NO longer have the pedal and the other 3 screws NOT included - I sold them a while ago. 

==

I took several pictures of this thumbscrew and there are a few pictures of the thumbscrew next to a ruler. And there is a REFERENCE picture of ths style thumb screws on an OCD pedal (pedal NOT included). Feel free to ask for more pictures.

• Comes from a smoke free and pet free environment.
• Feel free to ask questions.
• Will discount shipping on combined purchases!!

• USA Shipping is with USPS (with tracking).
• International Shipping is with First Class Mail International (with tracking).

CA Prop 65 Warning!
Everything sold into the state of California contains agents known to the state of California to cause cancer and birth defects, reproductive harm, or other, as yet unnamed, harm to its citizenry.