Saturnworks True Bypass Feedback + Volume Control Looper Loop Pedal

Need to switch multiple pedals on and off at the same time, not have that vintage non-true bypass pedal wreck your tone, or make crazy sounds such as a UFO landing, crickets chirping, or sirens? Do all of the above with the Saturnworks true bypass feedback loop pedal.

The Saturnworks feedback loop pedal provides dual functionality. Without the feedback footswitch activated it functions as a normal true bypass loop pedal, allowing you to isolate and bypass pedals that are not true bypass, switch on/off groups of pedals (or all your pedals) at once, use it as a tuner out, an A/B pedal, or even a mute pedal.

The Saturnworks feedback looper can also be used as a volume control looper, with a volume control on the return jack, to trim the volume of whatever is in the loop. The volume control is helpful if a pedal in the loop has an unwanted volume boost and doesn't have its own volume control. 

With the feedback switch activated things can get crazy. The feedback function of the looper is designed to send the output signal back to the loop's input through a potentiometer. This can produce some some very interesting results ranging from oscillating, growling, chirping sounds, to flat out noise, to nothing. The key to the feedback looper is experimentation. Some pedals can produce great results while some have little to no effect at all. You can also try various combinations of pedals. Your pickups and pickup selector position as well as your volume and tone controls also have a tremendous effect on the sound produced. The pedal's control knob determines the amount of feedback being sent back to the input. Sometimes you may need to turn it all the way up while other times you may find a sweet spot with the level turned low. If making a lot of complex noise is something you're into, then look no further.

The feedback pedal provides a strange sonic landscape and you never know what you're going to get.

The Saturnworks feedback looper is handcrafted with excellent components and features including:

• High quality footswitches.
• A rugged 4.5" x 2.5" x 1.5" (1590B size) die-cast aluminum enclosure. 
• Heavy duty Neutrik 1/4” TS jacks. 
• This pedal is passive and doesn't need power to work. The power is only to make the LEDs light up. The LEDs rum on standard 9v DC center-negative power.
• Top quality Lumberg brand power jack. 
• High quality wire made in the USA. 
• Handcrafted and bench-tested in California, USA
• A 1-year warranty against parts and manufacturing defects.
  
  Check out saturnworkspedals.com for the full Saturnworks lineup.