Rare Vintage Fulltone Hi Power Distortion & Overdrive Booster F.E.T Hi-Gain USA!

Rare Early Serial Silver Model!

With Original Box and Manual!

Hand Made in California USA!

FREE Shipping!

Fast Dispatch!

Want huge amp like FET distortion with a booster that slams it even harder? You just found it!

Two hand made Fulltone pedals live in this one silver box! 

Run them together for thick sustaining gain, or flip the switch and play it your way.

And this is no ordinary one. It is an early serial GT500 that still has its original box and owner’s manual!

Two Killer Pedals In One Box

On the left is the Booster and Overdrive, with Volume and Overdrive knobs plus Bass and Highs controls. Give your amp a lift or add some grit.

On the right is the Hi Gain Distortion, with Volume and Distortion knobs plus Bass, Mid and Highs controls. Fulltone built it for sustain that keeps singing even at low volume, and for big chunky low string rhythm tones.

A Wah Inductor Inside!

Yes, there is a real wah style inductor on the board. It drives the Mid control so you can push or pull the low mids, mids and high mids hard.

Add the Bass and Highs controls and you can dial in far more than a simple tone knob ever could.

Stack It Your Way

The centre switch picks which side comes first.

Booster into Distortion slams the front end for even more gain and sustain.

Distortion into Booster gives you a solo boost to jump out of the mix.

Each side still works on its own too.

Pure Discrete FET Tone

Fulltone packed in 9 FETs, 2 Mosfets and 1 transistor.

No opamps. No clipping diodes. All analog and fully discrete.

Inside The Box

Check out the internal photo. A neat hand built board, the Fulltone inductor right in the middle and not an opamp chip in sight.

Condition

Shows some signs of use and wears its vintage years with pride!

What You Get

The Fulltone GT500, its original box and its original owner’s manual, exactly as shown in the photos.

It runs on a 9V battery or a DC power adapter (both sold separately).

NOTE! Power Supply Tip

Very high gain pedals can be fussy with power supplies. If you hear a whistle, try a different adapter or run it on a fresh battery.

Specifications

·        Brand Fulltone

·        Model GT500 Hi Gain Distortion and Overdrive Booster

·        Made in California USA

·        Finish Silver Grey

·        Circuit Discrete FET, analog, no opamps

·        Maximum current draw approx. 14mA (all knobs cranked)

·        Weight about 680g

·        Size 146mm wide x 98mm deep x 64mm high (to top of knobs)

·        Distortion side input impedance 150K and output impedance 15K

·        Booster side input impedance 500K and output impedance 600 ohms

·        Power 9V battery or DC adapter (both sold separately)

Stomp on a piece of collectible boutique pedal history and make your amp roar before it is gone!

👉👉👉 READ ME! TERMS 👈👈👈

• Couriers Are Unable To Deliver Large Items to P.O. BOXES or Parcel Lockers

• Please provide a "Street" address for courier delivery.

• CHECK all photos – what you see is what you get.

• ASK ANY questions BEFORE buying.

• Clean and Smoke-Free Environment.

• No pickups – shipping only.

• Shipping cost quoted for major capital/metro areas.

• If you’re out in "the sticks," please ask for a shipping quote first.

• Shipping includes freight, solid/safe packaging, insurance, and tracking.

👉 Check Out My Awesome Gear & SALES on REVERB here:-

https://reverb.com/au/shop/davids-gear-outlet-1531