MAXON ROD-880 REAL TUBE OVERDRIVE.

The first offering in the Real Tube Series is the ROD880 Real Overdrive. The ROD880 is just that – a real tube overdrive unit that will warmth and incredible sustain to any guitar rig. The ROD880 works very much like and additional preamp for your amplifier, and when combined with various Drive settings on your amplifier it can be a very powerful tone shaping tool. Powered by one hand-selected 12AX7WXT preamp tube, the ROD880’s Gain and Master Volume controls provide a wide variety of overdrive tones, from clean boost all the way to searing, saturated sag. Bass, Treble, and Mid Boost controls with extended operation ranges offer a limitless array of tonal options, from the classic “808” tone to beefy, low end chunk. All of the ROD880’s sounds are kept clean and noise-free via the rear mounted, switchable Noise Reduction circuitry with variable Threshold control and a 1:2 noise reduction ratio. This tiny tone arsenal is powered via a standard 9-volt DC adaptor, allowing easy integration into your pedalboard or rack setup. When you’re ready for the real thing, the ROD880 Real Overdrive delivers.

Input Impedance 500 Ohms
Input Jack: 1/4" standard phone jack
Output Impedance: less than 10K Ohms
Output Jack: 1/4" standard phone jack
Equivalent Input Noise: less than -100 dB (input shorted, IHF-A weighted)
Max Output Level: +10 dB (typical)
Controls: Gain, Master, Bass, Middle, Treble, NR Threshhold (rear)
Switches: Effect, NR on/off (rear) Tone Control Range (Bass) 100 Hz 0 to 28 dB (typical) (Middle) 1 KHz 0 to 25 dB (typical) (Treble) 3 KHz 0 to 22 dB (typical)
Noice Reduction: Ratio 1:2 or more (approximate)
Tube: Selected dual triode tube (typically Sovtek 12AX7WXT)
Power Consumption: 175 mA at 10VDC / 165 mA at 9VDC
Dimensions: 110 (W) x 160 (D) x 72 (H) mm
Maxon ROD 880 Real Tube Overdrive Guitar Effect Pedal. Item works perfectly. Slight wear from general use. Replacement knobs. Power supply not included. Shipping is calculated from 16105. Thanks for looking and Good Luck!