BIGZUN LADDER Low Pass Filter Eurorack Analog Transistor Ladder VCF 6HP 24dB Resonance Drive
BIGZUN LADDER – 6HP Eurorack analog transistor ladder filter
LADDER is a classic 24 dB/octave transistor ladder low-pass filter in only 6HP, with resonance up to self-oscillation, a DRIVE control for warm saturation and voltage control of the cutoff. Two outputs work at the same time: the deep 24 dB OUT 24 and the brighter 12 dB OUT 12.
It is built around the classic four-pole transistor ladder: discrete transistor pairs, real capacitors between the stages and an exponential converter for the cutoff. The result is the round, warm low-pass sound known from vintage synthesizers – from soft, dark basses to squelchy resonant sweeps and a clean sine wave when the filter self-oscillates.
Why LADDER
- fully analog transistor ladder, no microcontroller, no menus
- 24 dB/oct and 12 dB/oct outputs working at the same time
- resonance up to self-oscillation – the filter becomes a sine oscillator
- DRIVE from clean to warm saturation
- bass compensation: at high resonance the low end drops only about 4–5 dB instead of about 14 dB (a classic ladder weakness), with no extra knob
- only 6HP wide
Controls
- FREQ – cutoff frequency, about 20 Hz to 16 kHz (about 10 octaves), clockwise = higher
- RES – resonance; self-oscillation from about 85% of the rotation (also with no signal on IN)
- DRIVE – input level: up to about the middle clean, further clockwise more and more saturation (louder and fatter)
- CV AMT – depth of the CV input, about 1 octave/V at maximum (exponential)
Jacks
- IN – audio input (up to 10 Vpp)
- CV – cutoff modulation (envelope, LFO, sequencer)
- OUT 24 – 4-pole low-pass, 24 dB/oct – dark, classic ladder sound
- OUT 12 – 2-pole low-pass, 12 dB/oct – brighter, with stronger self-oscillation
Technical specifications
- Format: Eurorack 3U, 6HP
- Filter: analog transistor ladder low-pass, 24 dB/oct (OUT 24) and 12 dB/oct (OUT 12)
- Cutoff range: about 20 Hz – 16 kHz
- CV input: about 1 oct/V with CV AMT at maximum (approximate, not for precise tuning)
- Input: about 100 kΩ, up to 10 Vpp, ±12 V safe
- Outputs: AC-coupled, up to about 8–11 Vpp with DRIVE at maximum; self-oscillation about 2–4 Vpp (OUT 24) and 5–7 Vpp (OUT 12)
- Power: ±12 V, about 6–8 mA per rail; 10-pin power header
- Reverse-polarity protection diodes on the power rails
Perfect for
Basses, leads, acid and squelchy sequences, dark pads, percussive pings and Berlin School sequencer lines.
Good to know
- Fully assembled and tested – ready to use.
- Requires a Eurorack case and power supply (not included).
- Designed and built in Poland by BIGZUN.
- Questions about the module? Message me – I'm happy to help.
Reverb Buyer Protection
Reverb has your back if your item is lost, damaged, or doesn't match its description. Simply report any issues within 7 days and we'll help you get a full refund.Learn more about Reverb Buyer Protection.
| Condition | Brand New (New) Brand New items are sold by an authorized dealer or original builder and include all original packaging.Learn more |
|---|---|
| Brand |
|
| Model |
|
| Categories | |
| Year |
|
| Made In |
|
Product safety information may be available here.








