*All listings are tested before they are listed and before shipping to be 100% in proper working condition. If there is an issue it will be detailed here ---> 

*Ships with what is in the photos*

*From Website:

DISCONTINUED

Mad Professor Loud´n Proud is a vintage 4-input Marshall in a box. It’s a compact pedal with a complete amp signal path replicated inside. Not only the preamp but also the power amp containing phase inverter, push-pull stage, and output transformer simulation. This internal structure makes the pedal not only sound but also behave like a real amp.

And like a vintage Marshall amp, the pedal has a moderate amount of gain. This is what led us to adding a boost/fuzz to this medium gain overdrive circuit. The pre boost has the capability of pushing 13dB, which adds a nice amount of gain to the pedal. It also thickens the midrange a bit so feel free to experiment with the boost also for a different voicing for the overall tone of the pedal. The fuzz is designed to work like a vintage germanium fuzz. By engaging the fuzz you can find a great variety of tones from a clean tone to a thick and warm fuzzy tones just by rolling the guitar volume. The vintage germanium fuzz + Marshall plexi is a classic tone combination that we absolutely wanted to include to the Loud ´n Proud pedal!

You will also find a switch for two different character voicings in the Loud´n Proud pedal: tighter bass and slightly compressed tone on the left with a looser bass including maximum dynamics on the right. If you love the vintage Marshall amp tone, you will also love this pedal. It’s the real deal for those who dare!

CONTROLS:

BASS: Adjusts the amount of the low frequencies.

MIDDLE: Adjusts the amount of the mid frequencies.

TREBLE: Adjusts the high frequency amplification in the preamp section.

GAIN: Adjusts the amount of distortion.

VOLUME: Sets the output level.

PRESENCE: Adjusts the high frequency amplification in the power amp section by changing high frequency feedback.

FUZZ VOL: Sets the output level of the fuzz.

BOOST / FUZZ: Adjusts the amount of the boost or the fuzz.

CHARACTER SWITCH: Tighter bass and a bit compressed sound on the left and a looser bass with maximum dynamics on the right.

FUZZ / BOOST SWITCH: Chooses between the fuzz or the boost circuits.

TECHNICAL SPECIFICATION:

Power requirements: 6F22 9V battery or DC eliminator 2.1 mm plug center negative and positive sleeve.

Current consumption: 27 mA at 9VDC

Supply voltage: 9V

Input impedance: 500k Ohms, 8k Ohms for Fuzz

Output impedance: 1k Ohms

True Bypass