SM81-LC  SHURE 

 Ultimate Studio Condenser Mic with 10dB Attenuator 

Become a master of sound capture with the Shure SM81-LC Cardioid Condenser Handheld Wired Microphone. This professional-grade microphone is engineered for studio recording, broadcasting, and sound reinforcement, making it a versatile choice for a variety of audio applications.

The SM81-LC is renowned for its wide frequency response, which enables it to accurately capture the full range of acoustic sounds. From the delicate strumming of a guitar to the resonant chords of a piano, and the sharp crash of cymbals, this microphone ensures every note is recorded with precision.

Its low noise characteristics and low RF susceptibility further enhance its performance, providing clean, clear audio free from interference. This makes the SM81-LC an industry standard for recording acoustic instruments and other sound sources that require a high level of detail and clarity.

Constructed with durability in mind, the SM81-LC is designed to operate efficiently across a wide range of temperatures and humidity conditions. This makes it a reliable choice for both indoor and outdoor recording sessions.

The microphone is powered by phantom power, ensuring consistent performance even in demanding environments. It comes equipped with a swivel adapter for flexible positioning, an attenuator-switch lock for controlling sound levels, and a foam windscreen to minimize wind noise and plosive sounds.

For ease of transport and storage, the SM81-LC is accompanied by a sturdy carrying case. Whether you're a professional recording artist, a podcaster, or a sound engineer, the Shure SM81-LC Cardioid Condenser Handheld Wired Microphone with 10db Attenuator is a sound investment in high-quality audio capture.

The SM81 requires phantom power. This may be supplied to the microphone by a mixer, preamplifier or console with built-in phantom power or from an external power supply (such as the Shure model PS1A). Phantom power sources providing between 11 and 52 Vdc are suitable.

Features:

• 20 Hz to 20 kHz frequency response

• Flat response curve for accurate reproduction of sound sources

• Low noise and high output clipping level

• Low distortion over a wide range of load impedances

• Cardioid polar pattern, uniform with frequency and symmetric about axis, providing maximum rejection and minimum coloration of off-axis sounds

• Low RF susceptibility

• Selectable low-frequency response: flat, 6 or 18 dB/octave rolloff

• 0 dB/10 dB lockable attenuator switch

• Phantom powering (DIN 45 596 voltages of 12 to 48 Vdc)

• Rugged steel construction for durability

• Field-usable over wide range of temperature and humidity conditions

Specifications:

• Type: Condenser (electret bias)

• Applications: Studio recording, broadcasting, sound reinforcement and standard applications involving acoustic instruments, especially guitar, piano, and cymbals.

• Frequency Response: 20 to 20,000 Hz

• Polar Pattern: Cardioid (unidirectional) response ½ uniform with frequency, symmetrical about axis

• Impedance: Output Impedance Rated at 150 ohms (85 ohms actual) Recommended minimum load impedance: 800 ohms (May be used with loads as low as 150 ohms with reduced clipping level)

• Output Level: Sensitivity (at 1,000 Hz) Open Circuit Voltage 45 dBV/Pascal (5.6 mV) (1 Pascal = 94 dB SPL)
  Clipping Level (at 1,000 Hz): 800 ½½ Load .4 dBV (0.63 V) 150 ½½ Load .15 dBV (0.18 V)
  Total Harmonic Distortion: Less than 0.5% (131 dB SPL at 250 Hz into 800 . load )

• Connector: Output Configuration and Connector Balanced, transformer-coupled output; male XLR connector

• Polarity: Positive pressure produces positive voltage on pin 2 relative to pin 3

• Power Requirements: Supply Voltage 11 to 52 Vdc, positive, pins 2 and 3 / Current Drain 1.2 mA max
  Dimensions: 8.34"x 0.92"

• Weight: 8 oz

SALE: $439.99

SFREE S&H in continental US (e-mail for international / offshore USA rates)