Bind Master Pro

What Is Bind Master Pro?

Bind Master Pro is a specialized guitar-building tool system designed to help luthiers, custom guitar builders, repair professionals, and serious hobbyists cut cleane…
Free Shipping - Spend $99 or more at Bind Master Pro and get free Standard shipping at checkout
About Bind Master Pro

What Is Bind Master Pro?

Bind Master Pro is a specialized guitar-building tool system designed to help luthiers, custom guitar builders, repair professionals, and serious hobbyists cut cleaner, more consistent binding and purfling channels.

Our flagship product, the Bind Master Pro Guitar Binding Router Jig, uses a floating router carriage supported by linear rails. This allows the router to move smoothly with the contours of the instrument while helping keep the cutter stable, square, and controlled.

The system is designed for use on flat-top guitars, carved tops, archtops, and custom-shaped instruments where maintaining a consistent binding ledge can be difficult with freehand routing methods.

What the Bind Master Pro Does

The Bind Master Pro supports the weight and movement of a compact trim router while the instrument is guided beneath the cutter.

Its floating carriage travels vertically along supported linear rails, allowing the router to follow changes in the height and contour of the guitar body. This helps the cutting bit remain square to the side of the instrument while producing a cleaner, more uniform binding channel.

The system is intended to help builders:

Cut consistent binding and purfling ledges
Maintain greater router stability and control
Reduce unwanted tilting during routing
Follow flat, carved, and contoured instrument tops
Improve repeatability between passes
Reduce the effort required to support the router by hand
Create a more controlled setup for detailed guitar-building work

The router, binding bit, cutting bearings, guitar body, workbench, and general hand tools are not included unless specifically stated in the selected product configuration.

Why It Was Created

Cutting binding channels around a guitar body can be one of the most demanding stages of an instrument build.

Traditional handheld routing methods require the builder to support the router while maintaining a consistent angle and cutting depth around curves, changing body heights, carved tops, and irregular contours. Even a small amount of router tilt can produce an uneven ledge that requires additional correction.

Bind Master Pro was created to make this process more stable, controlled, and repeatable.

By supporting the router on a floating linear-rail carriage, the system allows the builder to focus on guiding and positioning the instrument rather than carrying the full weight of the router. The goal is to reduce guesswork and help builders achieve cleaner results with greater confidence.

Every design decision is focused on practical workshop use, including smooth vertical movement, router-specific mounting options, adjustable instrument support, durable materials, and configurations suited to different builders and equipment.

Who It Is Designed For

Bind Master Pro is designed for:

Professional luthiers
Custom guitar builders
Guitar repair professionals
Small instrument-building shops
Serious hobby builders
First-time builders seeking greater routing control
Builders working with flat-top guitars
Builders working with carved-top or archtop instruments
Makers producing custom or unusually shaped guitar bodies

The system is intended for users who are familiar with compact routers, cutting tools, and standard woodworking safety practices.

Users should always follow the router manufacturer’s instructions, wear appropriate personal protective equipment, secure the instrument and work surface, disconnect power before making adjustments, and test the setup on scrap material before routing a finished instrument.

Where Bind Master Pro Is Made

Bind Master Pro is based in Palm Bay, Florida, USA.

Our products are designed, manufactured, assembled, inspected, and prepared according to the selected configuration. Router mounts and other components are produced specifically for the equipment options offered through our store.

Most in-stock products are processed and shipped promptly. Custom-built, made-to-order, and specially configured components may require up to five business days for setup, manufacturing, inspection, and packaging.

Each order is reviewed before shipment to help ensure that the selected components and configuration are complete.

Standard and Carbon Xtreme

Bind Master Pro is available in Standard and Carbon Xtreme configurations.

Standard

The Standard version is manufactured from durable glass-reinforced PETG and uses brass threaded inserts in key mounting locations.

It is designed to provide a strong, stable, and cost-effective solution for regular guitar-building and repair work.

The Standard configuration is a good choice for builders who want the complete Bind Master Pro functionality with dependable workshop durability.

Carbon Xtreme

The Carbon Xtreme version is manufactured from carbon-fiber-reinforced PETG and also uses brass threaded inserts in key mounting locations.

It is designed for builders seeking increased rigidity, dimensional stability, and durability in a premium material configuration.

Carbon Xtreme is especially well suited for frequent workshop use and for builders who prefer a stiffer, more reinforced component structure.

Both versions use the same core floating-router concept. The primary difference is the material used in the manufactured components.

Router Compatibility

Router-specific mounting options are available for select compact trim routers from popular brands, including:

DeWalt
Makita
Milwaukee
Ryobi
RIDGID
Bosch

Customers should confirm their exact router model before ordering.

Router manufacturers may change housing dimensions, base designs, mounting-hole patterns, and hardware between models. Compatibility with one router from a brand does not automatically guarantee compatibility with every router made by that brand.

Custom router mounts may also be available for equipment not included in the standard selections.

To request a custom mounting configuration, contact Bind Master Pro before ordering and provide:

Router brand
Exact model number
Clear photographs of the router base
Mounting-hole measurements
Bolt-pattern dimensions
Any relevant base-plate information

Custom mounts may require additional production time.

Built for Better Control

Bind Master Pro was developed to give guitar builders a more stable and repeatable way to approach binding-channel routing.

Whether you are building your first instrument or working in a professional luthier shop, the system is designed to help you maintain control while producing cleaner and more consistent results.

For compatibility questions, product assistance, or help selecting the correct configuration, contact:

Bind Master Pro
Palm Bay, Florida, USA
Email: [email protected]
Phone: 443-966-5392

Master Your Edge. Perfect Your Craft.

Shop Website

Shipping Policy

I will ship with tracking to the listed regions. To negotiate shipping rates to other locations, please send me a message.

Return Policy

New Items

Returnable within 14 days of delivery.

Used & Vintage Items

Returnable within 7 days of delivery.

General Terms

Items must be returned in original, as-shipped condition with all original packaging and no signs of use. Buyer assumes responsibility for all return shipping costs unless the item was not received as described.

Make sure to check the return policy on each individual listing as some items may be sold "As-Described" and not eligible for a return.

Tax Policies

RegionRate
Alabama, US*Calculated at checkout
Alaska, US*Calculated at checkout
Arizona, US*Calculated at checkout
Arkansas, US*Calculated at checkout
California, US*Calculated at checkout
Colorado, US*Calculated at checkout
Connecticut, US*Calculated at checkout
District of Columbia, US*Calculated at checkout
Florida, US*Calculated at checkout
Georgia, US*Calculated at checkout
Hawaii, US*Calculated at checkout
Idaho, US*Calculated at checkout
Illinois, US*Calculated at checkout
Indiana, US*Calculated at checkout
Iowa, US*Calculated at checkout
Kansas, US*Calculated at checkout
Kentucky, US*Calculated at checkout
Louisiana, US*Calculated at checkout
Maine, US*Calculated at checkout
Maryland, US*Calculated at checkout
Massachusetts, US*Calculated at checkout
Michigan, US*Calculated at checkout
Minnesota, US*Calculated at checkout
Mississippi, US*Calculated at checkout
Missouri, US*Calculated at checkout
Nebraska, US*Calculated at checkout
Nevada, US*Calculated at checkout
New Jersey, US*Calculated at checkout
New Mexico, US*Calculated at checkout
New York, US*Calculated at checkout
North Carolina, US*Calculated at checkout
North Dakota, US*Calculated at checkout
Ohio, US*Calculated at checkout
Oklahoma, US*Calculated at checkout
Pennsylvania, US*Calculated at checkout
Puerto Rico, US*Calculated at checkout
Rhode Island, US*Calculated at checkout
South Carolina, US*Calculated at checkout
South Dakota, US*Calculated at checkout
Tennessee, US*Calculated at checkout
Texas, US*Calculated at checkout
Utah, US*Calculated at checkout
Vermont, US*Calculated at checkout
Virginia, US*Calculated at checkout
Washington, US*Calculated at checkout
West Virginia, US*Calculated at checkout
Wisconsin, US*Calculated at checkout
Wyoming, US*Calculated at checkout
*Marketplace Facilitator State. Reverb collects tax on the seller's behalf.Learn More

Reverb Gives

Your purchases help youth music programs get the gear they need to make music.

Oops, looks like you forgot something. Please check the fields highlighted in red.