The sE Electronics X1 S is a large-diaphragm cardioid condenser microphone designed for versatile vocal and instrument recording in commercial facilities, project studios, home setups, and mobile rigs. The handcrafted gold-sputtered capsule uses a pressure-gradient design for directional focus and off-axis rejection, with a gold-plated XLR connector and 48V phantom power requirement.

A 20 Hz to 20 kHz frequency response, selectable 80 Hz or 160 Hz low-cut filters, and switchable -10 dB or -20 dB pads let you close-mic loud sources such as drums and amplified guitars. Without a pad engaged, the X1 S handles up to 140 dB SPL.

Key Features

• Hand-crafted condenser capsule built and tuned in sE's capsule room
• Redesigned electronics improve sensitivity, SPL handling up to 160 dB, and lower self-noise
• Switchable -10 dB and -20 dB pads for extended dynamic range
• 80 Hz or 160 Hz low-cut filters reduce rumble and proximity-effect bass
• All-metal chassis rejects electrical interference
• Gold-plated XLR connector for loss-free signal connection

Specifications

• Capsule: Hand-crafted 1" true condenser
• Polar pattern: Cardioid
• Frequency range: 20 Hz to 20 kHz
• Sensitivity: 30 mV/Pa (-31 dBV)
• Max SPL: 140 / 150 / 160 dB (0 / 10 / 20 dB pad, 0.5% THD at 1 kHz)
• Equivalent noise: 9 dB
• Dynamic range: 131 / 141 / 151 dB (0 / 10 / 20 dB pad)
• Signal-to-noise ratio: 85 dB
• Low-cut filter: 80 / 160 Hz, 6 dB/oct, switchable
• Attenuation pad: 10 / 20 dB, switchable
• Output impedance: 125 ohms
• Recommended load impedance: greater than 1k ohms
• Connectivity: 3-pin male XLR
• Power: 48V phantom (P48 per IEC 61938)
• Current consumption: 6.0 mA
• Dimensions: 58 mm (2.28") diameter x 169 mm (6.65") length
• Weight: 445 g (15.70 oz)

In the Box

• X1 S microphone
• Microphone stand clip
• Thread adapter