Ibanez TMB400TA Talman Bass — Cosmic Blue Starburst
The Talman is one of those Ibanez designs that keeps earning its way back — an offset body shape with roots in the brand's history, reimagined here as a bass that punches well above its price point. The TMB400TA pairs a poplar body with a tamo ash top that gives each one a slightly different grain character, finished in this Cosmic Blue Starburst that catches light in a way most basses at this price don't even attempt.
Under the hood, you're getting a PJ pickup configuration with Ibanez's Dynamix pickups — a split-coil P in the neck and a single-coil J at the bridge, both passive — run through an onboard Ibanez Custom Electronics 2-band active EQ. The stacked controls keep the layout clean: one knob handles volume and pickup balance, the other gives you bass and treble boost/cut. It's a surprisingly flexible setup that lets you move from a thick, old-school P-bass thump to a more articulate J-bass growl without a lot of fuss.
The roasted maple neck is a practical touch — the heat treatment adds stability against humidity and temperature swings, which matters if your bass lives in a gig bag and goes wherever you go. The bound rosewood fingerboard with acrylic block inlays sits across 20 medium frets on a full 34-inch scale, and the B10 bridge with 19mm string spacing keeps everything solid and fully adjustable for intonation.
This is a well-thought-out bass for players who want real tonal range and a comfortable, reliable instrument without crossing into four-figure territory. Whether you're gigging regularly, recording, or just want a bass that does more than one thing well, the TMB400TA delivers.
Specifications
Neck: TMB4 Roasted Maple, bolt-on
Body: Poplar
Top: Tamo Ash
Body Finish: Gloss Polyurethane
Fretboard: Bound Rosewood, Acrylic block inlay
Frets: 20, Medium
Scale Length: 864mm / 34"
Nut Width: 41mm
Nut Material: Plastic
Fingerboard Radius: 240mm
Neck Dimensions: 21.5mm thick at 1F, 24.5mm thick at 12F; 62mm wide at 20F
Neck Pickup: Dynamix P (Passive)
Bridge Pickup: Dynamix J (Passive)
Electronics: Ibanez Custom Electronics 2-band EQ (Active)
Controls: Volume/Pickup Balancer (stacked), Bass/Treble Boost-Cut (stacked)
Bridge: Ibanez B10, 19mm string spacing
Hardware: Chrome
Tuners: Ibanez
Factory Tuning: E-A-D-G
String Gauge: .045/.065/.085/.105
Case/Gig Bag: Sold separately
Under the hood, you're getting a PJ pickup configuration with Ibanez's Dynamix pickups — a split-coil P in the neck and a single-coil J at the bridge, both passive — run through an onboard Ibanez Custom Electronics 2-band active EQ. The stacked controls keep the layout clean: one knob handles volume and pickup balance, the other gives you bass and treble boost/cut. It's a surprisingly flexible setup that lets you move from a thick, old-school P-bass thump to a more articulate J-bass growl without a lot of fuss.
The roasted maple neck is a practical touch — the heat treatment adds stability against humidity and temperature swings, which matters if your bass lives in a gig bag and goes wherever you go. The bound rosewood fingerboard with acrylic block inlays sits across 20 medium frets on a full 34-inch scale, and the B10 bridge with 19mm string spacing keeps everything solid and fully adjustable for intonation.
This is a well-thought-out bass for players who want real tonal range and a comfortable, reliable instrument without crossing into four-figure territory. Whether you're gigging regularly, recording, or just want a bass that does more than one thing well, the TMB400TA delivers.
Specifications
Neck: TMB4 Roasted Maple, bolt-on
Body: Poplar
Top: Tamo Ash
Body Finish: Gloss Polyurethane
Fretboard: Bound Rosewood, Acrylic block inlay
Frets: 20, Medium
Scale Length: 864mm / 34"
Nut Width: 41mm
Nut Material: Plastic
Fingerboard Radius: 240mm
Neck Dimensions: 21.5mm thick at 1F, 24.5mm thick at 12F; 62mm wide at 20F
Neck Pickup: Dynamix P (Passive)
Bridge Pickup: Dynamix J (Passive)
Electronics: Ibanez Custom Electronics 2-band EQ (Active)
Controls: Volume/Pickup Balancer (stacked), Bass/Treble Boost-Cut (stacked)
Bridge: Ibanez B10, 19mm string spacing
Hardware: Chrome
Tuners: Ibanez
Factory Tuning: E-A-D-G
String Gauge: .045/.065/.085/.105
Case/Gig Bag: Sold separately
| Condition | Brand New (New) Brand New items are sold by an authorized dealer or original builder and include all original packaging.Learn more |
|---|---|
| Brand | |
| Model |
|
| Categories | |
| Fretboard Material |
|
| Color Family |
|
| Series | |
| Right / Left Handed |
|
| Active / Passive Pickups |
|
| Neck Material |
|
| Pickup Configuration |
|
| Wood Top Style |
|
| Finish Pattern |
|
| Active Preamp |
|
| Model Family |
|
| Finish Style |
|
| Body Material |
|
| Number of Strings |
|
| Offset Body |
|
| Body Shape |
|
| Scale Length |
|
| Number of Frets |
|
Product safety information may be available here.


