The Moog Mother 32 with AC adapter, Patch Cables, etc in excellent condition.

SPECS

• SOUND ENGINEAnalog
• POLYPHONYMonophonic
• KEYPAD13 Note
• STEP SEQUENCER32-Step with 64 Sequence Locations, Keyboard and Step Edit Modes
• SEQUENCER PANEL CONTROLSTempo, Swing, Run/Stop, Hold, and Reset
• SOUND SOURCES1 Oscillator With Pulse and Saw Waveforms, 1 White Noise Generator, 1 External Audio Input
• OSCILLATOR RANGE8Hz-8KHz (16KHz max with LFO/CV)
• Close

• FREQUENCY CONTROL+/- 1 Octave
• VOLTAGE CONTROLLED MIXER+/- 5V Crossfades Between the Selected Oscillator Wave and External Audio Input (Normalled to White Noise)
• FILTER20Hz-20KHz Switchable Low Pass / High Pass 4-Pole Transistor Ladder Filter
• GLIDEAssigned to Pitch (On/Off Per Step)
• MODULATION SOURCESLFO (TriangLe or Square), VCO Mod Input (Normalled to EG)
• MODULATION DESTINATIONSPulse Width, Oscillator Frequency, Filter Cutoff ( Modulation Polarity)
• LFO PANEL RATE1Hz to 350Hz (600Hz max)

• ENVELOPESelectable AD (Multi-Trigger) / ASD (Single-Trigger)
• VC MIXERVoltage Controlled Crossfade/Mix Circuit for Mixing Two DC Coupled Signals
• PATCHBAY32x 3.5mm Jacks
• CV/GATE INPUTSExternal Audio, Mix CV, VCA CV, VCF Cutoff, VCF Resonance, VCO 1V/Octave, VCO Linear FM, VCO Modulation, LFO Rate, Mix 1, Mix 2, VC Mix Control, Mult, Gate, Tempo, Run/Stop, Reset and Hold
• CV/GATE OUTPUTSVCA, Noise, VCF, VCO Saw, VCO Pulse, LFO Triangle, LFO Square, VC Mix, Mult , Mult 2, Assign, EG, KB, Gate

• ASSIGNABLE OUTPUTMultipurpose control output for selecting from 16 available functions: Sequencer Accent, Sequencer Clock, Sequencer Clock /2 Sequencer Clock /4, Decimated "Ramp”, Decimated "Saw”, Decimated "Triangle”, Stepped Random, STEP 1, MIDI Note On Velocity, MIDI Channel Aftertouch, MIDI Pitch Bend, MIDI CC1 Mod Wheel, MIDI CC2, MIDI CC4 and MIDI CC7
• EXTERNAL AUDIO INPUT3.5mm
• AUDIO OUTPUT¼” TS Line / ¼” TRS Headphones (Shared Output Jack)
• MIDI IN5-Pin DIN input
• MIDI CONTROLNote, Gate, Pitch Bend (Mod Wheel, After Pressure, Velocity Available Via Assignable Output)

• INCLUDED POWER SUPPLY110-250VAC, 50-60Hz, +12VDC 1A
• POWER CONSUMPTION2.8W
• EURORACK CURRENT DRAW230mA (+12V – from 10-pin header)
• EURORACK MOUNTING DIMENSIONS60HP (.69” 26mm Module Depth)
• WEIGHT3.5lbs
• DIMENSIONS12.57”W x 4.21“H (with knobs) x 5.24“D