The Rode Wireless GO Gen 3 Interview Bundle: One Wireless System, Two Camera Formats

This bundle is built for the working creator who shoots both invisible-lavalier and visible-handheld interviews on the same day. The Rode Wireless GO (Gen 3) in Orange is the hero — a Series IV 2.4 GHz dual-channel wireless system with 32-bit float onboard recording, 32 GB of safety backup per transmitter, the same upgraded omnidirectional capsule that ships in the flagship Wireless PRO, and the new SC33 3-in-1 charging hub. Paired with two Rode Interview GO Orange handheld adaptors, the kit converts in seconds: clip a transmitter to your subject for hidden body-pack audio, or slide the same transmitter into the Interview GO cradle for a broadcast-style ENG handheld with a 237 mm ergonomic grip and a foam windshield. Two cradles means two-shot reporter-and-subject interviews on a single shoot, with both transmitters running 32-bit float to a single receiver. One purchase. One coordinated Orange color scheme. Two finished camera formats.

32-Bit Float on Every Transmitter Is the Reason This System Exists

The Wireless GO (Gen 3) is the first compact wireless system to record 32-bit float WAV onboard every transmitter at the same time it's broadcasting to the receiver. Conventional wireless mics force you to set gain at capture time — too low and the noise floor swallows quiet speech, too high and a sudden laugh or door slam permanently clips. 32-bit float captures everything between those extremes losslessly and lets you set the level in your editor with no audible penalty. Each transmitter writes its track to a 32 GB internal card holding 40+ hours of WAV — configurable in Rode Central as Manual or Always-record. The wireless link to the receiver also continues to deliver real-time audio for the camera. Two parallel paths: the live broadcast for the camera, and a recoverable backup on the transmitter, running independently on every take. If the wireless link drops mid-interview, the transmitter still has the file.

Series IV 2.4 GHz Reach, GainAssist, and Why the Older Wireless GO Wasn't This Reliable

Series IV is Rode's current-generation 2.4 GHz digital wireless protocol — the same backbone that runs the Wireless PRO. Line-of-sight range steps up to 260 meters / 853 feet, roughly 30% farther than the Wireless GO II. The link runs with a near-zero-latency codec, so the audio coming out of the receiver is synchronized with the visual frame for frame. 128-bit encryption protects the signal at corporate, press, and event environments where unencrypted wireless on the same frequency would be a security gap. Inside the receiver, intelligent GainAssist watches the level coming from each transmitter and adjusts output gain to keep both subjects balanced — a quiet interviewer and a loud subject on the same panel both arrive at the camera at usable level without manual rides. The locking 3.5mm TRS connector means a tug on the cable during a walk-and-talk doesn't unplug the audio mid-sentence. Note that Series IV is not backwards compatible with Gen 1 or Gen 2 Wireless GO transmitters — Gen 3 is a clean break.

The Interview GO Cradle Is What Makes the Wireless GO Read as Broadcast Gear

A tiny black clip-on transmitter doesn't read on camera as ""the microphone."" Hand it to a subject for an interview and they don't know where to speak, the framing looks improvised, and the moment loses authority. The Rode Interview GO is a passive cradle adaptor that fixes this without changing the audio chain. Slide the transmitter into the cradle, lock it with the transmitter's existing cold-shoe clip, and the kit becomes a 237 mm cylindrical handheld — the ENG handheld format every news viewer recognizes. No batteries, no preamp, no signal-path electronics. Two cradles in this bundle means you can hand one to the subject and one to the reporter for a two-shot interview without ever switching microphones, and both cradles are Orange to color-match the Wireless GO Gen 3 transmitters that ship in this kit. The included high-density foam windshields cut light to moderate outdoor wind and plosives right out of the bag.

How the Bundle Works on a Two-Person Shoot

The receiver mounts on your camera or stays in your bag connected to a phone via Direct Connect Bluetooth in Rode Capture. Transmitter A goes into Interview GO Cradle A — the reporter's hand mic. Transmitter B goes into Interview GO Cradle B — the subject's hand mic. Both transmit Series IV 2.4 GHz to the same receiver and both record 32-bit float backup to internal storage. GainAssist balances the two voices in real time. If the conversation moves outdoors, the foam windshields handle the wind. If you decide mid-shoot to switch one of the subjects to a hidden lavalier, slide that transmitter out of its cradle and clip it under their jacket — same TX, same recording, no menu changes. At the end of the day, the SC33 charging hub charges the receiver and both transmitters from a single USB-C cable while you transfer the WAV backups via Rode Central. The cradles slide into the same bag with the rest of the kit.

What's in the Bundle and Who It's For

The Wireless GO (Gen 3) Orange ships with the receiver, two transmitters, an SC2 TRS-to-TRS camera cable, an SC21 USB-C to Lightning cable, an SC22 USB-C to USB-C cable, three furry windshields, a carry pouch, and the SC33 3-in-1 charging hub. Two Interview GO Orange handheld adaptors join the kit, each with its own foam windshield. The buyer for this bundle is the mobile journalist running daily field reports, the wedding videographer who needs vow capture from the officiant and Q&A from the toast, the YouTube creator who films man-on-the-street interviews, the podcast producer covering live conferences with pass-around guest mics, the corporate video team that interviews two executives on the same set, and the documentary shooter who needs both invisible lavalier coverage and visible reporter handheld in the same rig. If you're upgrading from a Wireless GO or GO II, the 32-bit float, the longer range, and the SC33 hub are the upgrade case. If you're comparing the Wireless PRO, the GO Gen 3 brings 32-bit float onboard the transmitters at a meaningfully lower price — and the Interview GO cradles let you cover the format the PRO doesn't ship with.