Our Business Hours is Mon to Fri / 11:00 to 18:00 JPN time
We will close Sat and Sun, so we will reply to inquiry that received weekend on next week.
Your understanding will be appreciated.

We are receiving the customer order with first comes first serves basis both on website and at real shop.
So occasionally it will be sold out while having email communication.
Please understand in advance.

Japanese consumption tax is not required for international shopping. However you may be required to pay duty, tax and import fee when receiving your items in your country. You must pay all these duty, tax and fee as receiver/importer and we do not cover any of them.

■Please note
The product description is an automatic translation of the Japanese description. Please contact us if you have any questions.

-----------------------------------

A natural reverb pedal that can reproduce not only spring reverb but also natural room sounds.

Silver Spring Reverb (SSR) is a compact and easy-to-use digital/analog reverb with a pure, direct analog signal path, producing natural, ambient reverb without compromising the original sound.

The SSR bandwidth covers everything from the dark, warm reverb typical of amp spring reverbs to clear, crisp studio reverb.
- In order to keep the attenuation as natural as possible, no noise reduction system is installed.
The direct signal path is all analog and passes through the analog amplifier without any filtering.
- If the input is set lower than the maximum value, there will be no signal distortion or thinning.
- The reverb signal path uses filtering to create the natural ambience of SSR.

The SSR's sound is specially designed to provide the same effect when used with a clean signal, even under demanding distorted tones. While the SSR can be used before a distortion component, it is primarily designed to be used after. When using before a distortion component, use a low reverb setting.

SPECIFICATIONS
CONTROLS

TIME:
Sets the reverb decay time. Turning clockwise increases the decay. Fully counterclockwise approximates a small-room decay, while fully clockwise approximates the large hall decay of a plate reverb. Settings around the center position provide decay times that match rhythmic chords and single notes.

TONE:
Adjusts the bandwidth of the reverb signal. Turning it clockwise produces a brighter reverb tone, while turning it counterclockwise produces a darker tone. Fully counterclockwise produces a typical spring reverb, while fully clockwise produces a studio reverb response.

Reverb:
Mixes the reverb component into the dry signal. At the fully counterclockwise position, the reverb component is turned off completely, and as you turn it clockwise, the reverb effect increases.

ELECTRICAL SPECIFICATIONS

Current consumption:
80mA at 9VDC (AC adapter recommended)
Voltage range:
6-9 V, 9V 100mA recommended
Input impedance:
500k Ohms
Output drive capability:
10k Ohm
Signal-to-noise ratio:
90dB
Complete true bypass and input of circuit grounded in bypass.

POWER REQUIREMENTS
006P/6F22 9V battery or power supply (center negative/2.1 mm plug)