Our Business Hours is Mon to Fri / 11:00 to 18:00 JPN time
We will close Sat and Sun, so we will reply to inquiry that received weekend on next week.
Your understanding will be appreciated.

We are receiving the customer order with first comes first serves basis both on website and at real shop.
So occasionally it will be sold out while having email communication.
Please understand in advance.

Japanese consumption tax is not required for international shopping. However you may be required to pay duty, tax and import fee when receiving your items in your country. You must pay all these duty, tax and fee as receiver/importer and we do not cover any of them.

■Please note
The product description is an automatic translation of the Japanese description. Please contact us if you have any questions.

-----------------------------------

Please be sure to check before ordering

The warranty period for the ECLER WARM2 covers only natural failures within one year from the date of purchase. Damage or failures outside the warranty period will be repaired at a cost. Furthermore, since the warranty period is based on the date of purchase, the warranty period will not be extended if the product remains unopened and unused for a period of time after receipt, or if the product is used once and then stored in its box with little use.

In the unlikely event that an initial defect occurs, the product will be repaired. Please note that there are no replacements or loaner units available.
Also, please refrain from purchasing if you are concerned about damage to the outer box, scratches or dirt on the unit itself, the weight or feel of the knobs/faders, misalignment of the center detent, etc. Cancellations and returns are not accepted after purchase.

*Due to the manufacturing process, there may be damage to the outer box, dirt, scratches, etc. on the product itself. Please be aware of this in advance. Please understand that cosmetic issues are "product specifications." Only items with "usage problems" will be considered defective.

---

The WARM2 is Ecler's first rotary mixer, inspired by the warehouses of Chicago, the birthplace of house music, established in 1977.

In addition to the unquestionable audio quality from Ecler's sound design, which has been cultivated over many years, the main stage is dominated by "Alps Blue
Providing "familiar" manipulation with the "Velvet" potentiometer, WARM2 delivers the perfect sound mix you've never experienced before.

The analog bus circuit also features a built-in isolator, allowing you to remove frequency bands, enhance riffs, or create tremolo effects with a quick twist of the knob, expanding the possibilities for your performance.

At just 18.5cm wide, the WARM2 is the narrowest rotary mixer on the market. Despite its slim profile, it's packed with features that will delight players who demand both the best sound and their playing style, including 3-band EQ + trim, FX send control and pre/post fader selector, as well as exceptional dynamic and headroom range. While this mixer may look simple, it delivers the ultimate analog sound to the dance floor beyond imagination.

Main Features: 2+1 mixing channels, 1 MICRO input, 2 PHONO inputs, 3 LINE inputs, Master output (HOUSE): XLR and RCA terminals, Booth output (RCA)
◎Headphone monitor output via 6.3mm jack and 3.5mm mini jack ◎3-band full-cut EQ (main channel), 2-band full-cut EQ (microphone/line channel)
3-band isolator (300Hz and 4KHz, -∞/+12dB, 4th order 24dB/oct)
Maximum Output (without distortion: 21dBV (23dBu))
◎ Aluminum knobs with no visible screws. Ecler's exclusive design. ◎ Alps Blue Velvet potentiometer. ◎ FX send control and pre/post fader selector. ◎ Anodized aluminum faceplate. ◎ Wooden side panel included.

Input/Output Terminals: Input Line 1-2-3: RCA Stereo
PHONO 1-2: RCA stereo
MICRO 3: 6.3mm TRS BAL. jack
fx return: RCA stereo output
House (bal): XLR Stereo House (unbalanced): RCA Stereo Booth: RCA Stereo
FX SEND: RCA stereo
REC: RCA Stereo Headphones: 6.3mm/3.5mm STEREO JACK

Other Control Modes: Rotary and Alps Blue Velvet Potentiometer Phantom Voltage: 18VDC/5mA Max (Default ON)
MIX and PFL VU-Meter: 12 LED segments (-30dBV ÷ +20dBV)
[Body size]
Dimensions (excluding wooden sides): 400 x 185 x 100mm
Weight: 3.6Kg

*We strive to delete items promptly after they are sold in-store or via mail order, but there is inevitably a time lag when deleting items from the website. Please note that there may be cases where an item is sold out.