\n\n Dual Channel Rack Mount Wireless Systems \n

Audio-Technica’s System 10 PRO Rack-Mount digital wireless system provides the same interference-free operation in the 2.4 GHz range (outside TV bands) as the original System 10 wireless system but with expanded features and versatility. The durable half-rack chassis is equipped to house two receiver units that can be operated locally or released from the chassis and mounted remotely (up to 328 feet away) via Ethernet cable. Up to five chassis (10 receiver units) can be linked using the RJ12 cable included with each system, creating a stable, multichannel system with the simultaneous use of up to 10 channels.

\n

Like all the products in the System 10 wireless family, the PRO Rack-Mount features 24-bit operation, easy setup, clear, natural sound quality, and three levels of diversity assurance: frequency, time, and space. Frequency Diversity sends the signal on two dynamically allocated frequencies for interference-free communication. Time Diversity sends the signal in multiple time slots to maximize immunity to multipath interference. Space Diversity uses two antennas on each transmitter and receiver unit to maximize signal integrity.

\n

Each System 10 PRO Rack-Mount system includes an ATW-RC13 receiver chassis with rack-mount adapters, one or two ATW-RU13 receiver units with corresponding AT8690 receiver unit mounting brackets, a joining plate (for dual-channel systems only), one RJ12 cable, one AC adapter, and one or two ATW-T1001 UniPak® body-pack or ATW-T1002 handheld transmitters, or one of each. Both the receiver chassis and transmitters feature easy-to-read displays.

\nComes with:\nATW-RC13 Rack-mount receiver chassis, ATW-RU13x2 receiver unit and ATW-T1001 UniPak® transmitter x2. Select a Wireless Essentials® microphone or cable to complete the system.\n\n

Key Features

\n\n

\n
• Digital 24-bit/48 kHz wireless operation for ultimate sound quality and dependable performance
\n
• Operates in the 2.4 GHz range completely free from TV interference
\n
• Receiver units can be docked in the chassis or mounted remotely (up to 328 feet away) via Ethernet cable for added versatility
\n
• Up to five chassis (ten receiver units) can be linked and used simultaneously
\n
• Each receiver unit can be paired with up to 10 transmitters, allowing users to instantly switch between different transmitter configurations
\n
• Chassis’ System ID Display shows RF signal level, system ID, transmitter battery level, and system link status
\n
• Automatic frequency selection for seamless, interference-free operation
\n
• Extremely easy operation with instantaneous channel selection, sync, and setup
\n
• Three levels of diversity assurance: frequency, time & space
\n
• Ground-lift switch helps eliminate audible hum caused by ground loops
\n

\n

Technical Specifications

\n

OVERALL SYSTEM SPECIFICATIONS\nOperating Frequencies: 2.4 GHz ISM band\nDynamic Range: >109 dB (A-weighted), typical\nTotal Harmonic Distortion: <0.05% typical\nOperating Range: 60 m (200') Open range env. with no interfering signals\nOperating Temperature Range: 0° C to +40° C (32° F to 104° F) Battery performance may be reduced at very low temperatures\nFrequency Response: 20 Hz to 20 kHz\nDepending on microphone type\nRECEIVER SPECIFICATIONS\nReceiving System: Diversity (frequency/time/space)\nOutput Connectors: Remote Receiver Connector: RJ45\nLink Connector: RJ12\nMaximum Output Level: XLR, balanced: 0 dBV 1/4" (6.3 mm), unbalanced: +6 dBV\nPower Supply: 100-240V AC (50/60 Hz) to 12V DC 0.5A power supply switched mode external\nDimensions: 209.8 mm (8.26") W x 44 mm (1.73") H x 169.3 mm (6.67") D\nNet Weight: 940 grams (33.2 oz)\nAccessory Included: Power supply\nAccessories Included: AC adapter, Link cable, Rack-mount adapters, Joining plate, Rubber feet\nBODY-PACK TRANSMITTER SPECIFICATIONS\nRF Power Output: 10 mW\nSpurious Emissions: Following federal and national regulations\nInput Connections: Four-pin Locking Connector\nPin 1: GND, Pin 2: INST INPUT,\nPin 3: MIC INPUT, Pin 4: DC BIAS +9V\nBatteries: Two 1.5V AA not included\nBattery Life: >7 hours (alkaline)\nDepending on battery type and use pattern\nDimensions: 70.2 mm (2.76") W x 107.0 mm (4.21") H x 24.9 mm (0.98") D\nNet Weight: 100 grams (3.5 oz) without batteries\nHANDHELD TRANSMITTER SPECIFICATIONS\nRF Power Output: 10 mW\nSpurious Emissions: Following federal and national regulations\nBatteries: Two 1.5V AA not included\nBattery Life: >7 hours (alkaline)\nDepending on battery type and use pattern\nDimensions: 254.8 mm (10.03") long, 50.0 mm (1.97") diameter\nNet Weight: 280 grams (9.9 oz) without batteries\nAccessory Included: AT8456a Quiet-Flex stand clamp