Radial Engineering ProD2 2-Channel Passive Stereo Direct Box Bundle with XLR Cable, Instrument Cable, Coiled Guitar Cable, and Rechargeable Clip-On Tuner

Why the ProD2 and SSAV 20 ft XLR Cable Bundle Is the Complete Setup for Connects Stereo Keyboards to PA Systems at Live Ve

The Radial Engineering ProD2 and SSAV 20 ft XLR Cable bundle is a complete 2-channel passive stereo direct box package. The ProD2 is a 2-channel passive stereo direct box with Dual Eclipse ET-DB2 transformers deliver 20Hz–20kHz performance with warm, natural sound that rounds out digital edge, Passive design requires no batteries or external power supply — zero noise floor from active circuitry, 2-channel stereo capability in one compact enclosure — equivalent to two ProDIs side by side. The SSAV 20 ft XLR Cable is SSAV's purpose-built accessory for the ProD2: Balanced XLR design carries audio on two conductors at opposite polarity plus shield — common-mode rejection eliminates hum, buzz, and RF interference across the full 20-foot run, Standard 3-pin XLR connectors are compatible with all professional microphones, DI box outputs, mixers, preamps, and audio interfaces. Together, the ProD2 and SSAV 20 ft XLR Cable form a complete setup — the controller handles performance and the SSAV completes the rig. Designed for Connects stereo keyboards to PA systems at live venues and festivals.

ProD2 2-Channel Passive Stereo Direct Box: Snark Guitar Tuner

Passive design requires no batteries or external power supply — zero noise floor from active circuitry. 2-channel stereo capability in one compact enclosure — equivalent to two ProDIs side by side. −15dB pad switch handles high-output keyboards, samplers, and drum machines without distortion. Ground lift switch eliminates hum and buzz caused by ground loops between stage equipment.

SSAV 20 ft XLR Cable — Purpose-Built for the ProD2

Balanced XLR design carries audio on two conductors at opposite polarity plus shield — common-mode rejection eliminates hum, buzz, and RF interference across the full 20-foot run. Standard 3-pin XLR connectors are compatible with all professional microphones, DI box outputs, mixers, preamps, and audio interfaces. Connects microphones, DI box outputs, and balanced audio sources to mixers, preamps, and audio interfaces. The SSAV 20 ft XLR Cable is the purpose-built xlr cable for the ProD2 — a direct-fit solution from the same manufacturer ecosystem.

Instrument Cable — Purpose-Built for the ProD2

MIG (Mic, Instrument, Guitar) Professional Series construction for reliable instrument-level signal transfer. Molded 1/4"" TS mono plugs on both ends — straight plug to straight plug. Connecting guitar or bass to amplifier or effects processor. The Instrument Cable is the purpose-built instrument cable for the ProD2 — a direct-fit solution from the same manufacturer ecosystem.

55-957 — Purpose-Built for the ProD2

Coiled design extends to full reach when needed and retracts to eliminate excess cable on stage. Right-angle 1/4"" mono plug on instrument end reduces stress on guitar/bass output jack. Electric guitar to amplifier or effects processor with tidy cable management. The 55-957 is the purpose-built coiled guitar cable for the ProD2 — a direct-fit solution from the same manufacturer ecosystem.

How the ProD2 and SSAV 20 ft XLR Cable Work Together

The ProD2's Output impedance: 150Ω balanced|Maximum input: output connects directly to the SSAV 20 ft XLR Cable's XLR — no additional cables or adapters required. Both components ship together in one order, verified compatible and ready to connect the day they arrive.

What's in the Box

• Calrad 55-675-25 1/4"" Mono Instrument Cable, 25 Ft.
• Radial Engineering ProD2 2-Channel Passive Stereo Direct Box
• Calrad 55-957 Coiled Guitar Cable with Right-Angle Plug
• SSAV-MIC-20 20-Foot Balanced XLR Microphone Cable (Male to Female)
• On-Stage GTA4500 Rechargeable Clip-On Chromatic Tuner