• neck type SR55pc Maple/Walnut neck
• top/back/body Poplar Burl topNyatoh body
• fretboard Jatoba fretboardWhite dot inlay
• fret Medium frets
• number of frets 24
• bridge Accu-cast B505 bridge
• string space 16.5mm
• neck pickup PowerSpan Dual Coil neck pickupPassive
• bridge pickup PowerSpan Dual Coil bridge pickupPassive
• equaliser Ibanez Custom Electronics 3-band EQ w/3-way Power Tap switch
• factory tuning 1G,2D,3A,4E,5B
• strings D'Addario® EXL165 + .130
• string gauge .045/.065/.085/.105/.130
• hardware color Gold

• • Scale : 864mm/34"
  • a : Width 45mm at NUT
  • b : Width 68mm at 24F
  • c : Thickness 19.5mm at 1F
  • d : Thickness 21.5mm at 12F
  • Radius : 305mmR

• DESCRIPTION

  Guitar Neck Diagram
  a: Width of the neck at the nut
  b: Width of the neck at the fret position specified by the neck dimension
  c: Thickness of the neck at the first fret
  d: Thickness of the neck at the fret position specified by the neck dimension
  Radius: Radius of the fingerboard

DESCRIPTION

With the bass held in the playing position, there are three small knobs closest to the lower edge of the body. Directionally, from the lower bout towards the neck knobs are treble boost/cut, mid boost/cut, and bass boost/cut. There are two larger knobs above these, closer to the bridge. The knob closest to the neck controls volume, and the knob next to it is the pickup balancer control. There is a 3-way power tap switch next to the balancer knob. When the switch is in neck position, the humbuckers are tapped. When the switch is in center position, the humbuckers are in series. when the switch is in bridge position, the humbuckers are in power tap mode, which is tapped with additional low end added.

DESCRIPTION

The bass boost/cut frequency curve has a peak at 20 Hz, the variable width becomes smaller toward the high range, and the variable width becomes zero at about 1000 Hz. The variable range becomes slightly larger in the high range than around 1000 Hz, but it becomes zero again near 5000 Hz. The variable range of the peak frequency is approximately ±15 dB. The treble boost/cut frequency curve draws a mountain-shaped curve with a peak at around 10,000 Hz and zero variable range around 100 Hz. The variable range of the peak frequency is approximately ±15 dB. The mid-boost/cut frequency curve creates a bell-shaped curve with a peak around 450 Hz, and the variable width becomes zero near 20 Hz and around 10,000 Hz. The variable range of the peak frequency is approximately ±15 dB.