• Typical flat boundary microphone shape
  • Pristine sound due to low-noise electronics
  • Optimal sound quality due to gold-coated 3μm thin diaphragm
  • Perfectly suited for recording kick drums
  • Cardioid characteristic
  • Low-cut filter
  • Exchangeable capsule
  • Fully rubberized back
  • Robust construction
  • Mounting on surfaces possible
  • Compatible with sE Electronics sE8 ball capsule and the Kelly Shu Flatz Isolation System
Technical data:
  • Limiting sound pressure level: 143 / 153 / 163 dBSPL (0/10/20 dB attenuation filter).
  • Equivalent noise level: 14 dB(A)
  • Dynamic range: 129 / 139 / 149 dB (0/10/20 dB attenuation filter)
  • Signal-to-noise ratio: 80 dB
  • Impact sound filter: 80 / 160 Hz, 6 dB/oct, switchable
  • Attenuator: 10 / 20 dB, switchable
  • Power supply: 48 volts according to IEC 61938
  • Electrical impedance: 60 Ohm
  • Recommended load impedance: >1k Ohm
  • Current consumption: 5.0 mA
Versatile and rugged boundary microphone.

The SE Electronics BL8 is a boundary microphone with the same small diaphragm capsule that is built into the popular sE8 condenser microphone. Thanks to its acoustic design, the BL8 also allows you to record very low frequencies with high precision, making it ideal for recording kick drums. The transformerless Class A circuitry gives the Mikforon plenty of headroom without distortion. The cardioid polar pattern of the BL8 can be distinguished between three switchable stages. Thus, there is a switch on the rear panel that can be used to select the characteristic between "classic", "neutral-flat" and "modern". Modern" lowers the mids and 15dB and "classic" and 10dB. The switches for low-cut and att pad are also located on the back of the microphone and are used to counteract overload of the mixing console, microphone amplifier or audio interfaces. Low-frequency signal components can be removed at either 80 or 160 Hz via the Low Cut switch. An attenuation can be set via Att Pad, which reduces the signal of the microphone and 10 or 20dB. The BL8 is constructed of sturdy metal, making it suitable for stage use. In addition, it can be mounted with two screws, which are not included, on flat surfaces such as walls, but also on the grand piano.


ZustandBrandneu (Neu)
Brandneue Artikel werden von autorisierten Händlern oder Herstellern verkauft und kommen in originaler Verpackung.Weitere Informationen
Marke
Modell
  • BL8 Cardioid Boundary Microphone
Kategorien
Kabelgebunden/drahtlos
  • Kabelgebunden
Polarmuster
  • Kardioid
Mikrofontyp
  • PZM/Boundary

Möglicherweise sind hier Informationen zur Produktsicherheit verfügbar.

MUSIC STORE professional GmbH

Köln, Deutschland
Mitglied bei Reverb seit:2020

Reverb-Schutz

Einfache Rücksendungen, sichere Transaktionen, Support von Experten

Weitere Informationen

Sichere Zahlung

Beworbene ähnliche Inserate













Produktrezensionen

Reverb Gives

Mit deinen Käufen unterstützt du Programme zur Förderung Jugendlicher, damit sie das Equipment erhalten, das sie zum Musizieren brauchen.

Ups, sieht aus, als hättest du etwas vergessen. Bitte prüfe die rot hervorgehobenen Felder.