The FP-9500D is a direct drive single pedal, with a solid cast link between the rocker shaft and the footboard. The direct drive "pushes" the footboard back on rebound, giving the pedal a quicker response, dynamic action and a great sense of speed. This design has been the basis for several of the most widely-used bass drum pedals in drum hardware history. Yamaha is known for the design and building of very high quality hardware and the FP-9500D Direct Drive bass drum pedal is an outstanding example of that quality. The FP-9500D has adjustments for beater angle, footboard angle, and spring tension. The pedal frame has a stabilizer bar cast into it below the rocker shaft to eliminate flex. This keeps the bearings in alignment and gives the pedal a smooth feel. The hole in the beater hub is tear drop shaped so it securely holds the beater shaft and keeps the new two-sided beater from spinning. The FP-9500D gives you additional value by including a hard sided soft case for transport and storage. • The side-adjustable hoop clamp holds firmly to different thickness hoops, and tightens with a wing bolt. It’s easier to reach! • The new 2-way bass drum beater is felt on one side, and hard plastic on the other. • Spring Tension Adjustment Lock System so that once you set the tension, it won’t change! • New, wider footboard design provides a larger contact surface for your foot, delivering a lighter feel and greater playability. Grip is enhanced in the heel section and