This is NOT HD

Used Digidesign SYNC I/O Unit Used Unit! Includes SYNC and Power Please note there are some scratches on this unit, refer to images. SYNC I/O with Pro Tools Pro Tools | HD With Pro Tools | HD, SYNC I/O provides highly accurate lock to time code. Most SYNC I/O settings are available directly from within Pro Tools. Pro Tools | 24 MIX With Pro Tools | 24 MIX, SYNC I/O supports all features of the Digidesign USD (Universal Slave Driver), and emulates a USD on-screen in Pro Tools. SYNC I/O in Stand-Alone Mode SYNC I/O can be used as a stand-alone synchronization converter, time code generator, clock generator and time code character generator. Throughout this guide, the term stand-alone refers to systems using SYNC I/O but not using Pro Tools. In stand-alone mode, SYNC I/O is connected to time code and clock signals as needed, and configured from the front panel. Optionally, while in stand-alone mode, the SYNC I/O can be controlled remotely from a computer using the SYNC I/O Setup software utility. SYNC I/O Setup Software Utility (Windows Only) The SYNC I/O Setup software utility can be used with or without Pro Tools to control all SYNC I/O features from any supported Windows computer. The SYNC I/O Setup utility also provides firmware updating capabilities for SYNC I/O.