An NT1 with XLR & USB for Recording, Podcasting & StreamingFeaturing both an analog XLR connector and a digital USB-C connector, the black Rode NT1 5th Generation represents another major leap forward for this highly regarded large-diaphragm workhorse microphone. The dual connection options offer a new level of flexibility, allowing users without an audio interface to plug directly into the computer for recording, podcasting, and streaming duties courtesy of the onboard 32-bit floating point A to D converter. Of course, if you have an audio interface, podcasting station, or favorite microphone preamp, no problem—just connect the mic's XLR output to your analog equipment and you're good to go. Combining a true-condenser capsule, ultralow-noise circuitry, and an extremely durable housing, the Rode NT1 5th Generation large-diaphragm cardioid microphone is well suited for high-resolution digital recording of vocal and instrument sources at home, in the studio, or even on stage.Internally Shockmounted HF6 Cardioid Condenser Capsule
- Behind the protective mesh grille, the mic features Rode's 1" gold-sputtered HF6 capsule, designed to provide a detailed midrange response with smooth highs and warm bass.
- The cardioid polar pattern focuses audio capture on the souce in front of the mic, picking up less unwanted ambient sound from the back and sides.
- The transducer itself is suspended inside the microphone using Rycote's industry-leading Lyre system, minimizing external vibrations at the capsule level. The capsule is then married to high-grade electronics that have been designed to provide an extremely low noise level. The NT1 5th Gen is an incredibly quiet microphone, measuring only 4 dBA of self-noise.
- The mic is powered by phantom power through the XLR connector or by bus power through the USB-C port.
Revolution Preamp & 32-Bit Floating Point Converters
- Rode has equipped the digital side of the NT1 5th Gen with some innovative features to ensure you get outstanding audio quality from the USB connection, beginning with the built-in Revolution preamp, which provides plenty of ultralow-noise gain to feed the analog to digital converter.
- With its 32-bit floating point A to D converter, you'll never need to worry about clipping again. The converter supplies such a high headroom and wide dynamic range that it's virtually impossible to overload, allowing you to worry less about maintaining perfect recording levels and focus more on your creative work.
- Sampling rates up to 192 kHz are supported.
Control Your Audio and Customize Your Sound
- Rode's included software allows you to customize the NT1 5th Gen's sound signature to suit your voice with advanced APHEX processing, including the legendary Aural Exciter and Big Bottom.
- Remove background noise and make your audio sound smooth, detailed, and punchy with a compressor, noise gate, and high-pass filter.
- Fine-tune to perfection with granular control over every processor, just like professional audio mixing software.
- All audio processing is managed by the powerful DSP chip inside the microphone, which takes a load off your CPU.
- The software makes it easy to connect and mix multiple USB microphones and sources at the same time, allowing you to podcast and stream without a dedicated audio interface.
Bundled Accessories
- The NT1 5th Generation is supplied with the SM6, a high-quality suspension shockmount that provides isolation from external physical factors that may cause unwanted rumble and vibrations in the microphone.
- It includes a removable pop shield with two axes of adjustment and a telescopic arm for ultimate application versatility.
- The mic also comes with a balanced XLR microphone cable and a USB-C to USB-C cable.
RODE NT1GEN5B SpecsMicrophonePrimary ApplicationsLive Sound, Studio RecordingForm FactorLarge Diaphragm Mic / Stand/Boom MountIntended Sound SourcesVocals, Speech/Voice Over, InstrumentSound FieldMonoOperating PrinciplePressure GradientCapsule1 x CondenserDiaphragm1" / 25.40 mmPolar PatternCardioidOrientationSide AddressCircuitrySolid-State (JFET)PadNoneHigh-Pass FilterNoneTone AdjustmentNoneGain AdjustmentNoneIndicatorsNoneOn-Board ControlsNoneWindscreenNonePerformanceFrequency Range20 Hz to 20 kHzMaximum SPL132 dB SPLImpedance100 OhmsSensitivity-29 dBV/Pa at 1 kHzOutput Level8 mV (Max, 1 kHz)Dynamic Range128 dBSignal-to-Noise Ratio90 dB A-WeightedEquivalent Noise Level4.5 dB A-WeightedConnectivityOutput Connectors (Analog)1 x XLR 3-Pin Male (on Mic)Output Connectors (Digital)1 x USB-C Female (on Mic)Headphone ConnectorNoneCable Length19.7' / 6 mWireless ConnectivityNoneBluetoothNoneWi-FiNoneDigital AudioA/D Conversion32-BitSample RateUp to 192 kHzDigital Signal ProcessingCompressor, EQ, Noise Reduction, Sound PresetsOS CompatibilityWindows
macOS
*As of January, 2023: Check with manufacturer for the most up-to-date compatibilityMobile App CompatibleNo
*As of January, 2023: Check with manufacturer for the most up-to-date compatibilityPowerBus PowerNoneOperating Voltage24 V (Phantom Power)
48 V (Phantom Power)PhysicalColorBlackMountingShockmount (Included)Included CaseNoneIncluded FiltersPop FilterConstruction MaterialAluminumDimensionsø: 2 x L: 7.5" / ø: 5 x L: 19 cm (Microphone)Weight11 oz / 311 g (Microphone)
Reverb Buyer Protection
Reverb has your back if your item is lost, damaged, or doesn't match its description. Simply report any issues within 7 days and we'll help you get a full refund.Learn more about Reverb Buyer Protection.
Condition | Brand New (New) Brand New items are sold by an authorized dealer or original builder and include all original packaging.Learn more |
Brand | |
Model |
|
Finish |
|
Categories | |
Made In |
|
Microphone Type |
|
Wired/Wireless |
|
Polar Pattern |
|
Electronics |
|