Watch this item to be notified via direct offer from GMG!

As a thank you to our customers, while supplies last, we're including a FREE Pig Hog 20FT Mic Cable with the purchase of a new VR2 Active Ribbon Mic!

Brief Description

The VR1 and VR2 ribbon microphones mark a new era in ribbon technology. Whereas most ribbon microphones have a dark, muted high-frequency response, the VR1 and VR2 utilize a clever mechanical device to achieve nearly full-range frequency response that extends well beyond that of most other ribbon microphones, approaching nearly 20kHz. This provides an extended level of top- end detail, so the result includes not only the distinctly natural low-end and midrange that most ribbons provide, but also minimal loss in high frequency content. Guitar and brass tones retain their “edge”, cymbals still sound rich and full, and a supremely natural sound is achieved from top to bottom.

Additionally, the VR1 and VR2 can handle very high sound pressure levels and thus can be utilized for applications not normally considered for most ribbon microphones, including loud brass, drums, and electric guitar cabinets, both in the studio and on stage.

The VR2 is an active ribbon and requires +48V phantom power for operation. With higher sensitivity than the VR1, it is ideally suited for applications including acoustic instruments, piano, and vocals, as well as the same sources as the VR1 (guitars, drums, brass).

The VR2 can take violins and voices right to the foreground of your listener's stereo. The VR ribbon microphones from sE mark a new era for ribbon mic technology. Until the VR Series, the only ribbon mic in the world to perform across 20Hz-20kHz was our own Rupert Neve collaboration, the RNR1. This was achieved using state-of-the-art custom transformers and a Rupert Neve-designed circuit to reveal HF usually absent. With the VR mics, full frequency response is achieved using a clever mechanical device designed by Siwei Zou, the company CEO, and a hand-tensioned ribbon constructed by our highly specialized technicians in sE's capsule room.

• Frequency Range- 20hz to 18khz
• Self noise- 19db
• 2.5 um aluminum ribbon
• Sensitivity- 10mV/Pa
• Impedance-200 ohms

What’s in the box

• VR1 / VR2 microphone
• microphone stand clip
• thread adapter
• wooden case
• shock mount