Radial Power-2: Clean Power and a Light for Your Whole Rack

The Radial Power-2 is a single-rackspace power conditioner and surge suppressor with a feature no dark stage rack should be without: an integrated slide-out LED light tray. In one 1U steel unit it combines premium metal-oxide varistor (MOV) surge protection, a high-rejection RF interference filter, nine AC outlets, and a USB charging port with a pull-out tray of ultra-bright, multicolor LEDs that light up the equipment mounted below it. It protects the gear you have spent years assembling and, when the house lights drop, it lets you actually see it.

The Slide-Out LED Tray: See Your Rack in the Dark

Anyone who has knelt behind a rack in a dim venue, feeling for the right cable by touch, understands the problem the Power-2 solves. A tray slides out from the center of the unit and casts ultra-bright light across the rack gear directly below, turning a black hole of connectors into a clearly lit workspace. The LEDs offer seven selectable colors and a built-in dimmer, so you can match the mood of the room or dial brightness down to a soft glow. When not in use, the tray slides back flush and doubles as a small shelf.

Premium MOV Surge Protection That Lasts

Behind the lighting, the Power-2 is a serious power conditioner. Its premium metal-oxide varistor absorbs and clamps incoming voltage surges before they can reach your equipment, and unlike the low-grade MOVs in consumer power strips, it delivers superior thermal protection and a far longer service life, so its protection does not fade after the first few spikes. A 15-amp circuit breaker stands guard against overloads. This is protection engineered to keep guarding your investment for years, not weeks.

RF Filtering and a Non-Ground-Contaminating Design

The Power-2 runs the incoming AC through a high-rejection RF interference filter that keeps high-frequency noise and AM radio signals off the power line and out of your audio. It uses shunt-mode surge technology with a non-ground-contaminating design, diverting surges without dumping noise onto the shared system ground. The payoff is a quieter, more stable power feed for every console, amplifier, and interface downstream, and a lower overall noise floor when the mix gets quiet.

Nine Outlets, Wall-Wart Spacing, and USB Charging

The Power-2 provides eight rear-panel outlets, four of them widely spaced to fit bulky wall-wart supplies without crowding their neighbors, plus one easily accessible front-panel outlet for gear you connect often. A front-panel USB charging port rated 5V, 1A keeps a phone or tablet topped off from the rack itself, handy when the LED tray is doing double duty as a phone shelf. A 9.5-foot power cord and heavy-duty switch complete a distribution layout designed for working racks.

Built Radial Tough for Stage and Studio

Wrapped in a rugged steel chassis with reinforced connectors, the Power-2 is made to endure the heat, vibration, and constant load-in of touring while looking at home in a studio machine room. It is ideal for front-of-house engineers, backline techs, keyboard players, producers, and installers who need both clean power and clear visibility in low light. Rack it, wire your system through it once, and gain protection and illumination in a single rackspace.