EarCandy Bailey 2x8 guitar amp speaker cab Forest Green W/ Trans Cherry Front & Back 50 watts 8 Ohm

• All materials made in the U.S.A
• All AAA White Birch Wood Cabinet
• Pat pending Twin ported baffle
• Trans Cherry front and back
• No MDF or particle board anywhere
• All steel hardware, steel top recessed handle
• Steel input jack plate with Neutrik 1/4" guitar input
• Point to Point hand wired with silver solder
• Wired with 14 gauge OFC professional grade speaker wire
• Steel reinforced Rubber feet
• All Steel Black corner Hardware
• 22pounds loaded, 20 wide x 12 tall x 12 deep
• 50 watts @8 ohms
• Hand made in Indiana U.S.A
• Lifetime warranty on the cab, 7 years on the speakers.

• Please contact us with questions through Reverb
  
  

We have people using our Bailey 2x8 in all levels and all genres of music,everyone from kids practicing in their basement to professional players doing arena tours.

EarCandys Twin ported baffle allows the speaker to breath with the air coming in and out of the cab. Because of the way the porting works, the speakers are floating, they dont have to fight gravity or air pressure because of the porting. The speakers get exactly what they need which allows for more warmth. sustain, tone, clarity, volume and sound dispersion.

Our cabs are not beamy. Because of our porting design, the entire area in front of the cab is the sweet spot. The cabs are warm but do cut through, you can use it with a drummer and bass player and be heard with no issues.

You will notice a 180 degree sound dispersion so when you walk around the room the cab will sound the same, you do not have to be directly in front of it to audibly benefit from the tone of the cab.

Tone / Sound

• Articulate tone with clarity sustain
• Warm Reedy clean tone
• Big tight low end
• Buttery Mids
• Creamy Highs
• Beautiful clean tone with lots of head room
• High end component design for massive versatility
• Great for Jazz, Blues, Country, Classic Rock and even Metal
• Hand made and tested in Valparaiso Indiana USA

Read about how these Cabs are made:

EarCandys woods:
All of our woods are AAA with no voids, We have our lumber custom Milled to our Specifications so these descriptions apply to our cabs and tone descriptions only. Our woods are Engineered by us and Milled with a glue used by wooden Instrument makers. We do not use industrial laminated ply wood.

Tonejointing©

We have spent a very long time and a lot of money to engineer a new jointing process never seen before in the instrument enclosure industry. Finger and Dado jointing allow for cabinet flex or what has been known as box talk Box talk happens when sound pressure levels inside the cabinet apply enough pressure to push or put stress on the cab jointing. This allows the cabinet to flex in unison with the speaker polarity, thus creating muddy undefined and slow attacking bass and a over all sloppy tone.

Open back cabs create a bigger problem in the fact that they allow compression to un-evenly escape the cab from the back, opposite of where you need it and in a uneven resisted pattern. Even at low volume levels, this flex and resistance can greatly increase the amount of work your speaker has to do to sound Our cabs are built in a way that uses the compression and spl from the speakers in a positive way that actually forces the cab jointing together and not apart, so the louder you want to play, the tighter and more defined the cab will sound, offering no resistance or flex allowing for the most pure UN interrupted tone from a cab you have ever had.

Our cabs are heavily braced on all 4 sides attached at 32 points no further than 5 inches from each other all the way around the cab (imagine a drum rim with drum lugs) The attachment points are then tightened until all of them reach the exact same tinsel strength, meaning you can strike the cab on any side or any corner and it will ring true, in the same tone all other sides ring in, very much like tuning a drum.

What this means is, there is NO loose or UN attended to portions of the cab that will resonate more or less than another part (thus no dead spots in the cab, thus no box talk).

Creating a 110% pure and true completely even delivery of any tone, combine that with our select woods and your options of tone are unlimited. This also makes the cab basically one piece and almost indestructible. This is all done from inside the cab allowing the sound to travel away from the hardware and not into the hardware, allowing free and clear travel of sound. When taking 11 years to develop such a instrument for your instrument, why stop at that? So we use THE BEST materials we can find insuring you this will be the last cab you will need for a long long time. This is intellectual property of earcandycabs and is registered with a pat pending. All right reserved EarCandyCabs 2017.

Thank you!