Optimized acoustic design, discrete class-A circuitry, and a transformerless output combine for natural, effortless sound in the Stereo Pair SE7-SP from SE Electronics. This high-quality back-electret small diaphragm condenser microphone is intended for a wide range of studio and live sound applications for natural sound quality at all frequencies—without fuzz or lack of low-frequency punch in acoustic guitars, pianos, drums and beyond. Discrete electronics and the switchable attenuation pad ensure a high dynamic range, with high sound pressure level (SPL) handling capability and extremely low-noise components. The switchable low-cut filter helps eliminate rumble or outside noise and can compensate for an excess of bass frequencies caused by the proximity effect, enabling SE7-SP to close-mic a variety of instruments. A roadworthy all-metal design exceeds demands for on-stage applications in difficult environments for reliable operation, all the while maintaining the high-quality manufacturing standards of SE Electronics.

• (2) sE7 microphone
• (2) mic clip (with thread adapters)
• (2) wind screens

• High-Quality condenser capsule
• Quietest pencil mic in its class
• Switchable pre-attenuation pad
• Switchable low-cut filter
• All-metal housing with gold-plated XLR connector and premium finish

• Capsule Type: 1/2“ back-electret condenser capsule
• Polar Pattern: Cardioid
• Frequency range: 20 Hz - 20 kHz
• Sensitivity: 19 mV/Pa (-34.5 dBV)
• Max SPL: 136 / 156 dBSPL (0/20 dB Attenuation pad)
• Equivalent noise level: 16 dB(A)
• Dynamic range: 120 / 140 dB (0/20 dB Attenuation pad)
• Signal to Noise Ratio: 78 dB
• Low-cut filter: 80 Hz, 6 dB/Oct, switchable
• Attenuation Pad: 20 dB, switchable
• Powering: 48 Volts according to IEC 61938
• Electrical Impedance:
• Recommended load impedance: >1k Ohms
• Current consumption: 3.0 mA
• Connectivity: 3-pin male XLR connector
• Dimensions: Diameter: 23mm (0.91 in), Length 120mm (4.72 in)
• Weight: 128 g (4.52 oz.)