Rode Lavalier GO: The Broadcast-Grade Hidden Mic for the Wireless GO Workflow

The Rode Lavalier GO is a professional-grade wearable lavalier microphone engineered around a single mission: deliver broadcast-quality speech capture from a body-mounted capsule that nobody on camera notices. The 4.5mm omnidirectional condenser, gold-plated 3.5mm TRS plug, and Kevlar-reinforced cable make it the native lavalier match for any Rode Wireless GO transmitter — Gen 1, Gen 2 (Wireless GO II), or the current-generation Wireless GO (Gen 3). Clip it to a lapel, plug it into the TX, and the rig disappears into the shot. The mic that documentary crews, wedding videographers, and YouTube interviewers actually wear.

4.5mm Sub-Miniature Condenser Capsule with True Broadcast Frequency Response

The capsule head measures 4.5mm across — small enough to vanish on a tie, a lapel, or a hidden clip under clothing — yet large enough to deliver the kind of frequency response that broadcast voice work demands. Pickup runs a full 20 Hz to 20 kHz, with a 67 dB signal-to-noise ratio and a 110 dB maximum SPL that means even raised dialogue and emotive on-camera speech stay clean. Omnidirectional pickup keeps capture consistent regardless of head position — the subject can turn toward and away from the camera through a shot, and the lav doesn't drop level.

Kevlar-Reinforced 3.9 ft Cable Built for Daily Field Use

Lav cables are the first thing to fail on cheaper wearable mics. The Rode Lavalier GO uses a Kevlar-reinforced 3.9 ft cable that resists strain at the plug end, at the clip, and along the routed body length. The 3.5mm TRS connector is gold-plated for corrosion resistance and a clean signal path. The cable run is long enough to clip the mic on a lapel and route under the talent's shirt to a transmitter clipped at the waist or hip, but short enough to stay tidy in standard interview framing — no excess to coil and hide.

Native Pairing with Rode Wireless GO, Wireless GO II, and Wireless GO Gen 3

Rode designed the Lavalier GO as the official upgrade path for buyers using the Wireless GO transmitters' built-in capsule. The 3.5mm TRS plug with plug-in-power detect drops directly into the transmitter's input jack — no adapter, no impedance mismatch, no level loss. Sound profile is voiced for the Wireless GO series' encoding chain, so the lavalier capsule and the wireless system function as a single tuned signal chain rather than a hybrid rig. This compatibility extends to any other recording device with a 3.5mm TRS plug-in-power microphone input — DSLR audio jacks (with appropriate level matching), field recorders, and computer interfaces.

Discreet Body, Durable Clip, and Foam Pop Shield Out of the Box

Every Lavalier GO ships with the production-ready accessories needed to deploy on a shoot: a foam pop shield that slips over the capsule to reduce plosive consonants and light wind noise, a durable mounting clip with integrated cable-management channels that hold the cable run in place under shirts and lapels, and a soft carry pouch for transport between shoots. The mic itself weighs 0.2 oz (6 g) — light enough that the talent forgets it's there, and small enough to hide under tight clothing without printing through the fabric.

Who the Lavalier GO Is For

First-timer with a Wireless GO body and the built-in mic that came in the box: this is the lavalier you add to capture cleaner speech with the body-pack hidden on the subject's belt instead of clipped to their shirt. Upgrader from a cheaper $20 lavalier whose cable failed or whose audio sounded muffled: the 4.5mm broadcast capsule and Kevlar-reinforced cable are the spec gap you're closing. Comparison shopper considering the Lavalier II or the Wireless ME built-in: the Lavalier GO is the wearable lav explicitly tuned for the Wireless GO signal chain, at the lavalier price tier. One mic. Real broadcast pickup. Made to disappear on camera.