Eurorack Essentials DIY dualswitch

DIY dualswitch is an passive, bidirectional dual switch in eurorack format with 2 Inputs and 4 Outputs with 3,5mm high quality jacks.

Works great with any audio or cv signal!

Just send two signals (1+2) to different outputs ( A1 + A2 / B1 + B2) with a simple dual switch.

Sounds really great on stereo FX sends channel - just switch a stereo signal between two eurorack stereo effects on demand.

Or send a Gate/Trigger signal and CV (=Pitch)  to two sound sources.

It's bidirectional :) So, you can easly change between two step-sequencers CV+ GATE sequences on demand.

Try dualswitch with worng LR MS MS LR module and eurorack essentials LOW-CUT.

Just find good sounding M and S signal setting on LOW-CUT module and switch between two different filtered M + S signals. Great for breaks.
  
Works as simple stereo / dual switch-  or on / off switch (no cables patched to A 1 + A 2)

SPECIAL:

Works as flip-sides module as well (no cables patched to B1 + B2).
Just flip-sides - change two signals, e.g. swap L + R side of an stereo signal. Works great with audio stereo effects sends and returns channels - stereo delays, stereo reverbs, stereo filters....

Module specs:

• Width = 3HP
• Depth = 15mm
• Weight = 38g

No power supply needed - it's passive :

Comes with BEFACO Knurlies and 3mm thick aluminium front panel.

THIS IS A DIY PROJECT - DO-IT-YOURSELF passive module - DIY LEVEL: EASY

DIY dualswitch comes as a complete kit with

• 3mm aluminium front panel
• PCB
• 1 dualswitch
• 6 jacks
• 2 BEFACO Knurlies with washers
• Short Manual
• Paper stickers
• Handprinted paper bags
• Silk-paper packaging

DIY level: easy

ENJOY

IMPORTANT: Some pictures shows assembled DIY module!