With the T2, your transients will never be the same again. 

The versatility of the sE4400a's shock mount, patterns, filters, and pads, plus a titanium diaphragm for the most immediate percussion, bass, guitar & vocal transients you've ever heard.

This mic is the ultimate combination of solid-state performance and versatility. Based on the chassis and feature the spec of the acclaimed 4400a, but with the highly specialized capsule of the original sE Titan, it delivers full and perfectly balanced mid and low frequencies, while its titanium capsule produces un-hyped but ultra-detailed HF response. 

It is thus ideally suited for any percussive sounds - including kick & toms, the attack of a guitar or bass, hammer action of a piano, and hip-hop vocals. 

Features:

The Titanium Diaphragm

Unusually, the T2 features a hand-crafted titanium-sputtered capsule. This is much stiffer than our gold-sputtered capsules, meaning quicker transient response, which is important when recording instruments that create fast transients and attack - like drums and percussion - as it enables the microphone to maintain clarity and deliver exceptionally accurate performances. 

The stiffness of this special the diaphragm also allows it to withstand extremely high sound pressure levels, so it can handle the loudest percussion with ease. 

Custom Shockmount + Chassis 

The T2 shares the shock mount of the 4400a. Here's what TapeOp has to say about it. The flat, round edged chassis design and custom suspension mount allow the mic to be centered within the shock, flipped around and used flat against a drum head or guitar cab, or angled outwards and pushed through inside of a kick drum. And at less than 3/4" thick, it fits neatly in the palm of your hand but is built to take a beating on the road. 

Specifications: 

• Capsule Type: Hand-Crafted True Condenser.
• Diaphragm: 32mm Twin Titanium/Mylar.
• Directional Pattern: Cardioid, Hyper Cardioid, Omni, Figure-8.
• Frequency range: 20 Hz - 20 kHz.
• Impedance: 50 Ohms.
• Sensitivity: 25.12 mV/Pa (-32 dB).
• Max SPL: 122/132/142 dB (0/-10/-20 dB pad) (0.5% THD @ 1kHz).
• Signal to Noise Ratio: 78 Db.
• Self Noise: 16 dB(A).
• Pass Filter Switch: 60/120 Hz.
• Preattenuation Pad: -10/-20 dB.
• Matching Connectors: XLR3F.
• Power requirement: 48V phantom.
• Weight: 280g / 9.88oz.