The Yamaha DBR Series represents the most portable powered loudspeakers that Yamaha has to offer. Comprised of 10-inch, 12-inch, and 15-inch models, the versatile DBR series utilizes the same state-of-the-art Yamaha DSP, amplifier, and speaker technologies developed for the professional DSR and DXR lineups. Housed in newly designed, highly durable, and lightweight plastic cabinets, these speakers deliver high-resolution sound with remarkable clarity and dynamic characteristics at any output level. They are optimized for a wide variety of applications, including front-of-house (FOH) sound, floor monitoring, and rigged installations.  

Features

• High-Efficiency 1000W Class-D Amplifiers
  The DBR's lightweight, high-performance Class-D amplifier can produce up to 1000W of power (700W for the DBR10 model). This achieves a sound pressure level (SPL) of 132dB, delivered with remarkable clarity and dynamic characteristics.
• Custom Designed Transducer
  The high power output woofers deliver well-defined, powerful bass with minimal distortion. A 1.4" precision compression driver (1" on the DBR10) produces accurate mid-range and high frequencies.
• A Rugged, Highly Portable Cabinet
  DBR Series speakers feature a compact, lightweight, and durable plastic cabinet, offering the highest level of portability among Yamaha powered speakers. A sleek steel grille protects the internal components and increases cabinet durability, while newly designed ergonomic handles provide effortless transportation and system setup.
• Easy-to-use Onboard 2-Channel Mixer
  These speakers feature two input channels. CH1 features a combo jack that accepts both XLR and TRS Phone connectors for Mic or Line-level input signals. CH2 offers two input options: a combo jack (XLR or TRS Phone) and an RCA pin jack for stereo line-level sources like CD players. The onboard mixer allows you to select CH1+2 MIX to combine the signals of both channels, or CH1 THRU to pass only the signal from CH1.
• Smart Enclosure Design for Floor Monitoring
  The speakers feature an optimized 50° wedge angle specifically for floor monitoring. Additionally, the symmetrical shape of the DBR12 and DBR15 models allows for the effortless configuration of a mirror-mode floor monitoring system in either symmetrical or stereo setups.
• Rigging Points for Installation Applications
  DBR loudspeakers come equipped with M8 rigging threads. This allows for rigged applications using standardized eye-bolts or optional speaker brackets (which are not included).

Specs

• Speaker Type: 2-way, Bi-amp powered speaker, Bass-reflex type
• Frequency Range (-10dB): 50Hz – 20kHz
• Nominal Coverage (Horizontal x Vertical): 90° x 60°
• Low-Frequency (LF) Component: 15" cone, 2.5" Voice Coil, Ferrite Magnet
• High-Frequency (HF) Component: 1.4" Diaphragm, 1" throat compression driver, Ferrite Magnet
• Crossover: 2.1kHz: FIR-X tuning™ (linear phase FIR filter)
• Output Power (Dynamic): 1000 W (LF: 800 W, HF: 200 W)
• Output Power (Continuous): 465 W (LF: 400 W, HF: 65 W)
• Maximum Output Level (1m; on axis): 132dB SPL
• I/O Connectors:
  • INPUT 1: Combo x1
  • INPUT 2: Combo x 1 + RCA pin x 2 (Unbalanced)
  • OUTPUT: XLR3-32 x 1 (CH1 Parallel Through or CH1+CH2 Mix)
• Processors: D-CONTOUR: FOH/MAIN, MONITOR, OFF
• Heat Dissipation: Fan cooling, 4 speeds
• Power Requirements: 100 V, 100-120V, 220-240 V, 110/127/220V (Brazil), 50/60Hz
• Power Consumption: 74W (1/8 Power Consumption), 18W (Idle)
• Cabinet Material: Plastic
• Finish: Black
• Handles: Side x 2
• Flying and Mounting Hardware: Bottom x 2, Rear x 1 (Fit for M8 x 15 mm eyebolts)
• Pole Socket: 35mm (Bottom x 1)
• Dimensions (W x H x D): 455mm (17.9") x 700mm (27.6") x 378mm (14.9")
• Net Weight: 19.3 kg (42.6 lbs)