Tuned for sax, toms, brass, percussion plus other high-SPL environments

The PRO 35 is a cardioid condenser clip-on micropohone that excels in high-SPL applications, making it ideal for active stage performances. Its extended frequency response captures the subtle nuances of any performance. It includes a UniMount® mic clip, enabling accurate positioning and providing shock resistance while protecting the mic element. Its cardioid polar pattern provides reduced pickup of sounds from the rear and sides, thus improving isolation of the desired sound source.

Sax • Toms • Brass • Percussion • Other high-SPL instrument stage performance audio capture

• PRO 35 microphone
• AT8418 UniMount microphone instrument mount
• AT8538 power module
• Soft protective pouch

• UniMount clip permits accurate positioning and shock resistance
• Cardioid polar pattern rejects side/rear pickup
• Extended frequency response captures subtle nuances
• 6' permanently attached shielded cable with TA3F-type connector (for the power module)

• Element: Fixed-charge back plate, permanently-polarized condenser
• Polar Pattern: Cardioid
• Frequency Response: 50 - 15,000Hz
• Low Frequency Roll-off: 80Hz, 18dB/octave
• Open Circuit Sensitivity: -45dB (5.6mV) re 1V @ 1Pa
• Impedance: 250Ω
• Max. Input Sound Level: 145dB SPL, 1kHz @ 1% T.H.D.
• Dynamic Range (typical): 115dB, 1kHz @ Max SPL
• S/N Ratio: 64dB, 1kHz @ 1Pa
• Phantom Power Requirements: 11-52VDC, 2mA typical
• Switch: Flat, roll-off
• Weight (Microphone): 0.3oz. (8g)
• Weight (Power Module): 2.9oz. (81g)
• Dimensions (Microphone): 0.98" (25.0 mm) long, 0.40" (10.2 mm) diameter
• Dimensions (Power Module): 3.66" (92.9 mm) long, 0.74" (18.9 mm) diameter
• Output Connector (Power Module): Integral 3-pin XLRM-type
• Cable: 6ft (1.8m) long (permanently attached to microphone), 0.10" (2.6 mm) diameter, 2-conductor, shielded cable with TA3F-type connector
• Note: further information can be found within the items located under the "Documentation" tab above.