Yamaha SG-2C Flying Banana Banana Yellow 1968
Finish: Original
Body Material: Alder Body
Body Details: Alder Solid Body
Neck Material: Maple Neck
Fingerboard Material: Rosewood Fingerboard
Neck Profile: C-Shape
Neck Thickness (IN): 1st fret: .81", 12th: .89"
Fingerboard Radius: 7.25
Nut Width: 1-21/32 in
Neck Details: One-piece bolt-on maple neck with a rosewood board, center small dot inlays, truss adjustment at the heel
Electronics: Two single-coil pickups, 3-way toggle pickup selector switch, master volume and tone -- The electronics are original and free from signs of modification or repair. There are no visible pot codes.
Pickup Measurements: Neck: 9.5 kΩ, Bridge: 10 kΩ
Hardware: Original
Weight: 6 lbs 3.7 oz
Modifications / Repairs: n/a
Case Details: Original Hard Shell Case -- The middle latch is not functional
Cosmetic Condition: Minor nicks and dings can be found throughout the body and the back of the neck is smooth. There are two stress cracks in the finish near the bodies neck pocket - these do not compromise structural integrity. The back edge of the treble side lower bout shows an about 2" chip/gouge in the finish and wood. The top corner of the headstock is chipped.
Serial Number: 10730
Tech Notes: Currently, set up with 10-gauge strings and medium-low action. The neck sights with a slight twist and the frets are skinny and low showing wear. The guitar sets up well, regardless. -- The serial number dates from 1968.
Reverb-Käuferschutz
Reverb hilft dir weiter, wenn dein Artikel verloren geht, beschädigt ist oder nicht der Beschreibung entspricht. Melde alle Probleme einfach innerhalb von 7 Tagen und wir verhelfen dir zu einer vollständigen Rückerstattung.Erfahre mehr über den Reverb-Käuferschutz.
| Inseriert | vor 7 Jahren |
|---|---|
| Zustand | Sehr gut (Gebraucht) Artikel im Zustand Sehr gut können ein paar Makel oder Macken haben, aber funktionieren einwandfrei und sind ingesamt gut erhalten.Weitere Informationen |
| Marke | |
| Modell |
|
| Farbe |
|
| Kategorien | |
| Jahr |
|
| Hergestellt in |
|
| Korpusform |
|
Möglicherweise sind hier Informationen zur Produktsicherheit verfügbar.

