This Cry Baby Wah combines high gain distortion with the Classic circuit for Slash's cutting lead tone, with LEDs to indicate effect status.

POWER
The SW95 Slash Cry Baby ® Wah Wah is powered by two 9-volt batteries (accessed via the top of the pedal), an AC adapter such as the Dunlop ECB004/ECB004E,
or a DC Brick ™ power supply.

CONTROLS

• VOLUME knob controls overall effect volume
• GAIN knob controls overall amount of distortion
• DISTORTION switch toggles distortion effect on/off (red LED indicates on)
• FOOTSWITCH toggles pedal on/off (blue LED indicates on)

SETUP INSTRUCTIONS

• Run an instrument cable from your guitar to the SW95’s INSTRUMENT jack and another instrument cable from the SW95’s AMPLIFIER jack into your amplifier’s input.
• Set VOLUME and GAIN controls to their 12 o’clock positions.
• Push the toe of the pedal down until you feel a “click” to turn the pedal on/off.
• Rotate the VOLUME control clockwise to increase volume or counterclockwise to decrease it.
• To engage the SW95’s distortion circuit, push in the red DISTORTION switch.
• Rock your foot back and forth on the pedal to hear the vocal, expressive tones that the Cry Baby is famous for.
• Rotate the GAIN control clockwise to increase amount of distortion or counter clockwise to decrease it.
• DISTORTION CIRCUIT VOLUME KNOB on/off Switch with LED