EarCandy Heavy duty quad conducted High Def 1x10 1x12 guitar speaker cab wiring harness no soldering

The 1x wiring harness

• This Harness will work with any 1x configuration.
• This harness does not affect the ohm load, The speaker determines the ohm load.
• Designed for use with any guitar speaker cab.
• We point to point hand wire and solder every harness with silver solder.
• This harness comes with gold plated insulators,
• + and – ( + is the red clip and – is the black clip )
• Please click on the last picture for your wiring diagram
  
• This Harness comes ready to install with quick disconnects soldered to speaker wire.
  
• We use the very best Neutrik & Cliff brand input jacks.
• Built with an extra foot of cable for an easier install.
• 
  
• We use the very best input jacks money can buy.
• Built with 24 Inches of cable for an easy install.
• All terminations are sealed and protected for added reactive durability.
• Our heat shrink tubing is made of high end formulary compounds.
• Made with tight quality controlled manufacturing standards.
• Terminations are of 100% consistent physical reliability.
• Heated to 250°F (121°C) for a skin tight, flame retardant & flexible fit.
• Water & condensation proof at vastly different temperature ranges.
• Colors of the heat shrink may vary.
• This harness installed correctly will wire two, 4 ohm speakers to
  2 ohms, two 8 ohm speakers to 4 ohms or two 16 ohm speakers to 8 ohms.
• MIL SPEC = essential technical requirements for purchased material that is manufactured to military standards or substantially modified commercial items.

We’ve re-designed the speaker cable from the inside.. out, by replacing the usual 2 conductors with 4 more flexible and efficient conductors. Then we replaced the bulky outer jacket with a Hi-Tech engineered Nylon Braid.
The result is a lighter cable with better performance.
This new design will allow for larger conductor sizes in a smaller package.

EarCandy’s Premium internal Speaker Cable features-

• Rugged, engineered Nylon Braiding covering 4 tough PVC
  insulated center conductors.
• 4/20 AWG Ultra-Pure Copper Quad-twisted conductors.
• High-Performance Silver Solder Gold Plated Connectors with 12ga insulated Housings.
• State of the art construction designed for maximum performance.
• Our Quick Dis Connects are Gold Plated housed by 12ga thick rubber insulators
• Lifetime warranty on parts and labor

All of the parts of this wiring harness are made in the USA and the same top quality materials we use in our Premium guitar and Bass speaker cabs. All of EarCandy's Harness systems are equipped with EarCandy's "Cable retention system™ "

Our input jacks features a full metal bore and 9/16" Chrome plated steel nut. This 1/4" (6.35 mm) jack uses heavy duty contacts that delivers top quality signal transfer performance with a ultra heavy duty chassis that excels in professional audio applications.

All of the parts of this wiring harness are made in the USA and the same top quality materials we use in our Premium guitar and Bass speaker cabs. If you are not remotely familiar with soldering, this wiring harness with wire tabs already soldered is a better, safer choice.

This harness includes

• Jack plate cup with mounting screws
  
• cable clamps with mounting screws
  
• Full Chrome plated bore Input jack
• 24" cable with Silver solder plated cable ends
  
• All terminations completely sealed
• All Harness’s will ship the same day if ordered by 2pm CST
• Satisfaction Guaranteed!

Shipping & handling:

• We ship our smaller items within 1 business day.
• Parcel post is $4.50 and can take an undesired amount of time.
• Priority Mail is $8.50
• For Priority mail, message us so we can adjust the shipping for you.
• We do not profit from shipping and are happy to place as many parts & knobs in a Flat Rate Box, keeping the shipping cost at $8.50
• If an item is listed with free shipping, we will use USPS Parcel post.
• If an item is posted with a shipping fee of less than $7.00, we will be shipping it with USPS Parcel post.
• If an item is posted, it IS in stock and ready to ship with the exception of pre-build items which are only cabinets and speakers.
• We use UPS ground for cabs and speakers
  

Our Warranty

• You may return the item or items within 14 days of proof of delivery for a full refund minus shipping.

• The items must be returned back to us unopened and untampered with before we can issue a refund or replacement.

• Buyers are responsible for the shipping return cost & outbound cost if you are exchanging for cosmetic reasons.

• If you receive your items and they have been damaged in shipping, we will ship out the same item or item of equal value at no cost to you, after we receive pictures of the shipping damage.

• All EarCandy© brand items have a lifetime warranty against manufacturer Defects.

• Shipping costs are non-refundable and nonnegotiable.

Feedback

We thrive on providing excellent customer service. Your feedback is extremely important to us and we will leave feedback for you after we receive feedback from you. If we have not given you 5-star service, please let us know immediately so we may rectify the situation for you and earn your return business & 5-star rating before submitting your rating.

Contacting EarCandy©

• Messages are answered in 1 business day except weekends & holidays.
• Messages about items on Reverb MUST be sent through Reverb.
• We greatly appreciate your business and it is our goal to provide outstanding service with the highest quality products.
• Thank you to Reverb and Thank you for checking us out.

***PLEASE click on and read our Shop Policy, this tab can be found next to the description tab at the top of the item description, under the picture gallery.***

ALL EarCandy© item descriptions, specifications, and pictures are copyright protected by the DMCA and are the intellectual property of EarCandy© and may not be used in any way without expressed written permission.

Thank you!

EarCandy© On Reverb.com