The Universal Audio 1176LN Classic Limiting Amplifier is a hand-built reissue of the FET limiter Bill Putnam Sr. introduced in 1967. UA based it on the C, D and E revisions of the blackface 1176LN, with a Class A line-level output amplifier and a custom output transformer built to Putnam's original design. Engineers use it on vocals, bass, guitars and drums, and some run audio through it with the compression off just for the tone its amplifiers and transformer add.

Attack, Release and Ratio

Attack is adjustable from 20 to 800 microseconds and release from 50 milliseconds to 1.1 seconds. Four push buttons select ratios of 4:1 and 8:1 for compression, and 12:1 and 20:1 for limiting. The meter shows gain reduction or output level.

All Buttons In

Pressing all four ratio buttons at once gives the 1176's best-known setting. Distortion rises, the compression curve flattens and the unit lags behind the first transients. UA suggests it for drum room mics, for fuzzing out bass or electric guitar, and for pushing a vocal to the front of a mix.

Built in Santa Cruz

UA staff hand-build and test each unit at the UA Custom Shop in Santa Cruz, California. Two 1176LN units link for stereo through the optional 1176-SA Stereo Adapter, and audio connects on XLR or a barrier terminal strip.

Features

  • Hand-built reissue of the 1176LN, based on the blackface C, D and E revisions
  • FET compression with attack from 20 to 800 microseconds
  • Ratio buttons for 4:1, 8:1, 12:1 and 20:1, plus all-buttons-in operation
  • Class A line-level output amplifier
  • Custom Putnam-designed output transformer
  • Stereo linking of two units with the optional 1176-SA
  • XLR and barrier strip audio connections
  • 115 V or 230 V switchable power

Specifications

  • Type: FET compressor and limiter, 2U rackmount
  • Frequency response: 20 Hz to 20 kHz, ±1 dB
  • Total harmonic distortion: Less than 0.5%, 50 Hz to 15 kHz with limiting, at 1.1 second release and +22.5 dBu output
  • Signal-to-noise ratio: Greater than 81 dB, 30 Hz to 18 kHz, input at threshold of limiting
  • Maximum input level: +30 dBu
  • Input impedance: 600 ohms, bridged T-control, floating
  • Maximum output level: +24 dBu
  • Output impedance: 600 ohms, transformer-balanced, floating
  • Gain: 45 dB, ±1 dB
  • Attack time: 20 to 800 microseconds
  • Release time: 50 milliseconds to 1.1 seconds
  • Ratios: 4:1, 8:1, 12:1, 20:1
  • Audio connectors: XLR and barrier terminal strip
  • Stereo linking: Two units via the optional 1176-SA
  • Power: 115 V or 230 V, switchable; 13 W maximum; standard detachable IEC inlet
  • Meter: dB gain reduction and dB output
  • Dimensions (W x H x D): 19 x 3.5 x 12.25 in
  • Weight: 11 lb (unit), 14.5 lb (shipping)

ZustandBrandneu (Neu)
Brandneue Artikel werden von autorisierten Händlern oder Herstellern verkauft und kommen in originaler Verpackung.Weitere Informationen
Marke
Modell
  • 1176LN Limiting Amplifier Reissue
Farbe
  • Classic
Kategorien

Möglicherweise sind hier Informationen zur Produktsicherheit verfügbar.

Über den Verkäufer

Blackout Audio

Toronto, Kanada
Mitglied bei Reverb seit:2023

Reverb-Schutz

Einfache Rücksendungen, sichere Transaktionen, Support von Experten

Weitere Informationen

Sichere Zahlung

Beworbene ähnliche Inserate













Produktrezensionen

Reverb Gives

Mit deinen Käufen unterstützt du Programme zur Förderung Jugendlicher, damit sie das Equipment erhalten, das sie zum Musizieren brauchen.

Ups, sieht aus, als hättest du etwas vergessen. Bitte prüfe die rot hervorgehobenen Felder.