Sontronics STC-1S Matched Stereo Pair of Condenser Microphones

The Sontronics STC-1S gives you a matched pair of compact condenser microphones made for clear, natural stereo recordings. They work beautifully on acoustic instruments, drums, choirs, room sounds, and more. With a sturdy build, flexible controls, and several setup options, this pair is a great choice for both studio and live recording.

Sontronics STC-1S Matched Stereo Pair of Condenser Microphones Review

The STC-1S uses small-diaphragm condenser capsules with a cardioid pickup pattern and a 25Hz to 20kHz frequency response. Each microphone has switchable 0dB, -10dB, and -20dB pads plus 75Hz and 150Hz filter settings for handling louder sources and reducing unwanted low frequencies. The pair is laboratory tested for accurate stereo matching and can also accept optional omnidirectional or hypercardioid capsules. Each mic requires 48V phantom power and can handle up to 137dB SPL.

Sontronics STC-1S Matched Stereo Pair of Condenser Microphones Features

• Matched pair helps create a balanced and natural stereo image
• Clear, detailed capture works well with instruments, vocals, drums, and room sounds
• Flexible pickup options let you use optional capsules for different recording setups
• Switchable pad and filter controls give you more control over loud sources and low frequencies
• Solid brass construction provides dependable performance for studio and live use
• Includes clips, windshields, a stereo mounting bar, and a protective case

Sontronics STC-1S Matched Stereo Pair of Condenser Microphones Specs

• Microphone type is a matched stereo pair of small-diaphragm condensers
• Polar pattern is cardioid
• Frequency response is 25Hz to 20kHz
• Pad settings are 0dB, -10dB, and -20dB
• Filter settings are linear, 75Hz, and 150Hz
• Sensitivity is 20mV/Pa
• Impedance is 200 Ohms or less
• Maximum SPL is 137dB at 0.5% THD at 1kHz
• Equivalent noise level is 16dB A-weighted
• Connector is 3-pin XLR
• Power requirement is 48V phantom power
• Microphone weight is 0.60 lb each
• Packaged weight is 4.85 lb
• Microphone dimensions are 6.38 x 0.94 x 0.94 inches each
• Packaged dimensions are 9.25 x 5.12 x 11.22 inches