This limited edition of the Wylde Audio Overdrive comes bedecked in a special finish inspired by the Berzerker’s tribute band Zakk Sabbath, an homage to the godfathers of heavy metal.

The Long Story

This limited edition of the Wylde Audio Overdrive comes bedecked in a special finish inspired by the Berzerker’s tribute band Zakk Sabbath, an homage to the godfathers of heavy metal.

On the inside, it’s got the same guts, custom built for Zakk’s loud, tough, and relentless riffs and leads. It’ll transform your amp into a heavy, chunky crunch machine. With a simple Output, Tone, and Gain control layout, setup is fast and easy so that you can concentrate on the important business at hand—kicking major sonic ass. Zakk likes to stick it in front of a dirty amp and kick into full-on screaming lead tones with sustain that lasts for days.

Grab the MXR Zakk Sabbath Overdrive while you can, and unleash your six-stringed beast. Take no prisoners.

Features

• Run a cable from your guitar to the WA44ZS’s INPUT jack and run another cable from the WA44ZS’s OUTPUT jack to your amplifier.
• Start with all knobs at 12 o’clock. Turn the effect on by depressing the footswitch.
• Rotate OUTPUT knob clockwise to increase effect volume or counterclockwise to decrease it.
• Rotate TONE knob clockwise for a brighter tone or counterclockwise for a warmer tone.
• Rotate GAIN knob clockwise to increase overdrive intensity or counterclockwise to decrease it.
• Input Impedance : 1 MΩ
• Output Impedance : 7.5 kΩ
• Nominal Input : -22 dBV
• Noise Floor* : -88 dBV
• Bypass : Hardwire
• Current Draw : 2.2 mA
• Voltage Requirements : 9 volts DC

Power

• The MXR Wylde Audio Zakk Sabbath Overdrive is powered by a single 9-volt battery (remove bottom plate to install), a 9-volt AC adapter such as the Dunlop ECB003, or an MXR Brick™ Series power supply