Everyone at The Music Zoo loves when a vintage Gibson ES-330 comes in, and this one is no different - the whole staff loves it. A very early 1965 Gibson ES-330 in Sunburst with a factory-original Bigsby tailpiece. In 1965, Gibson transitioned to a 1-9/16" narrower nut width with chrome covers on the P90 pickups. This guitar however, retains the 1964 and prior 1-11/16" nut width, with a tone pot code dating to 1964, and tuners to match what Gibson used prior to '65 as well. So it is very likely this is one of the last ES-330s made in '64 and completed at the factory in early '65. <br><br>
The guitar retains all of the original electronics and hardware, with the original frets - with a low profile but still extremely playable. The bridge pickup is slightly lower in volume than the neck pickup due to height differences - they are both working at 100%. The Bigsby arm sits low from the original spring compressing down over the years - it still has a smooth action to it. Best of all - this guitar like any good Gibson hollowbody rings out like a bell and there's still plenty of room in the truss rod. The original case with a vintage curly cable are included with this fantastic ES-330!

• Hollowbody Electric Guitar
• 6 lbs, 10 oz.
• .820" Neck Thickness at 1st Fret
• 1.010" Neck Thickness at 12th Fret
• Sunburst Finish
• Laminated Maple Body
• Mahogany Neck
• Rosewood Fingerboard
• 24.75" Scale Length
• 12" Fretboard Radius
• 1-11/16" Nut Width
• 22 Frets
• Gibson Dog Ear P-90s with Covers
• ABR-1 Bridge with Nylon Saddles
• Bigsby Tailpiece
• Original Electronics and Hardware

Includes: Original Case and Vintage Curly Cable