Black Lion Audio PG-1 Type MkII - Power distributor

• Premium power supply
• professional protection against overvoltage
• voltage stabilization to 230V
• removes line noise, hum, RF interference etc.
• up to 99.7% noise suppression
• 6 switched Schuko connections in 3 circuits: analogue, digital, high current
• 2 unswitched connectors at the front
• dimmable 3-pin XLR socket for gooseneck lamp
• USB connector for a 6V/A1 charging cable
• warning lights for ground loops, overload, polarity
• loadable up to 10A
• high quality, low-noise capacitors from Panasonic and WIMA

The Black Lion Audio PG-1 Type F MkII supplies up to 8 devices with a filtered and stabilized mains voltage. It can supply up to 10 amps of current (equivalent to 2.3kW of apparent power) and has 3 separate circuits for the domains usually gathered in a studio rack: analogue, digital and high current. This ensures that these different types of equipment do not interfere with each other and can deliver maximum performance at the same time: Audio interfaces and converters are separated from interference voltages from analogue power supplies, analogue vintage equipment from high-frequency line interference from computer technology, and both from your studio monitors and power amps, which like to cause a voltage drop in the mains due to their current requirements.

On the front panel, the Black Lion Audio PG-1 Type F also has two additional unswitched connections, eg. for computer and cell phone, guitar amp or effects pedal, a USB port for a charging cable and a port for a lamp. There are also signal LEDs that warn you of overload, a ground loop or ground interruption, no matter how small, or a reversed polarity Schuko plug. The latter gives you another performance advantage: When swapping the neutral conductor (blue) and Phase (brown/black), many devices have a parasitic current flowing through the protective conductor, which can cause further unwanted interference in your system or trigger the RCD if 35mA is exceeded.