Synthrotek Five Amp Power DIY Kit - RED, 12V Power Brick

The Five Amp is a throwback to our original 5A Power Supply with some upgrades. It uses a quality 12V brick for the +12V power regulation instead of a +12V converter. The plus side of doing it this way is that whatever amperage the -12V and +5V rails are not using can be used by the +12V rail, which always draws the most of the three.

Five Amp comes in three different power configurations. We recommend selecting an option based upon your -12V rail draw. For a rule of thumb, Red (with red LEDs) will power a single row of 84 or 104HP, Green will power two rows of 104HP, and Blue will power three to four rows of 104HP.

Assembly instructions available online.

Features:

• RED: Power one row of 104HP.
• Up to +12V@3A, -12V@500mA,
• Advanced low-noise, fully-regulated voltage converters on the -12V and +5V rail
• Over-current protection: shuts off each power rail automatically if modules use too much current on that rail
• Two 16-Pin Eurorack power connectors, keyed for safety
• Molex quick-release connector for easy install of Synthrotek Noise Filtering Distribution Boards
• USB jack for powering an iPhone, Beat Step Pro, etc.
• Requires 12V power brick (input voltage 12V), DC Input Jack size: 2.1mm
• Module Width: 4HP
• Module Depth: 46mm