• Active, portable column PA system with integrated 8-channel digital mixer for bands, solo artists, DJs and events
• 1,500 W amplifier power, split between 800 W for the subwoofer and 700 W for the column speaker
• 12-inch subwoofer with laminar flow vent design and a column array featuring eight 3.5-inch neodymium drivers
• Maximum sound pressure level of 129 dB at a distance of 1 m
• Frequency response from 43 Hz to 20 kHz (-3 dB), frequency range from 37 Hz to 20 kHz (-10 dB)
• Wide sound coverage with a 120° horizontal and 40° vertical dispersion angle
• Four XLR/TRS combo inputs for microphone and line signals with individually switchable 48 V phantom power
• Additional Hi-Z connection on channel 4 for direct connection of high-impedance instruments
• Stereo line input 5/6 via two XLR/TRS combo sockets, RCA or 3.5 mm stereo jack
• Bluetooth stereo audio streaming on channels 7/8 and True Wireless Stereo with a second system
• Two internal effects processors for reverb, delay, chorus and other effects, plus a footswitch connection for activating effects
• Automatic Feedback Suppression (AFS) and Music Ducking for announcements over background music
• DSP modes: MUSIC, LIVE, SPEECH and CLUB, plus channel EQs, compressors on the Mic/Line channels and a customisable main EQ
• Control via a 2.8-inch colour LCD and remote control using the QuickSmart app
• QuickSmart Link via RJ45 for audio and shared control of two EVOLVE 50M G2 units; XLR mix output and separate XLR aux output
• Colour: Black

The Electro-Voice EVOLVE 50M G2 combines an active column PA system with an integrated 8-channel digital mixer. It is designed for bands, solo artists and mobile DJs who wish to connect and process multiple sources directly through their sound system. Four microphone/line channels, one stereo line channel and one Bluetooth stereo channel provide the basis for compact live and event set-ups. A separate monitor mix and effects processing can also be configured within the system.

A 12-inch subwoofer with a Laminarflow vent design handles the bass. The column array is fitted with eight 3.5-inch neodymium drivers. The total amplifier power of 1,500 W is distributed as 800 W for the low-frequency range and 700 W for the column speaker. With a maximum sound pressure level of 129 dB at a distance of 1 m, the EVOLVE 50M G2 offers ample headroom for mobile sound reinforcement applications. Its frequency response ranges from 43 Hz to 20 kHz at -3 dB, with an extended frequency range from 37 Hz to 20 kHz at -10 dB. The wide dispersion pattern of 120° horizontally and 40° vertically ensures even coverage of the audience.

The four XLR/TRS combo inputs accept microphone and line signals. 48 V phantom power can be activated individually for each of these inputs. Channel 4 also offers a Hi-Z connection, for example for a guitar with a passive pickup. Stereo sources such as keyboards, DJ controllers or external players are connected to inputs 5/6 via two XLR/TRS combo sockets, RCA or 3.5 mm stereo jack. Bluetooth streaming uses the 7/8 stereo channel. Channel EQs and compressors on the mic/line channels help fine-tune the mix.

Two internal effects processors with reverb, delay, chorus and other effects are available for sound shaping. A connected footswitch allows the effects to be switched on and off during a performance. The automatic feedback suppression (AFS) helps to reduce feedback. Music ducking automatically lowers the volume of the music at the stereo inputs during announcements. The DSP modes MUSIC, LIVE, SPEECH and CLUB, as well as a graphic or parametric main EQ, make it easy to adapt the sound to the programme and venue. All settings can be adjusted via the 2.8-inch colour display or the QuickSmart app.

The separate XLR aux output allows for a dedicated monitor mix, whilst the XLR mix-out transmits the mixed signal. Via QuickSmart Link, two EVOLVE 50M G2 units can be connected via a Cat5 cable for digital audio and shared mixer control. Bluetooth True Wireless Stereo adds the option of wireless stereo playback with a second system. The subwoofer, spacer bar and column are slotted together to form a system approximately 2.09 m high. According to the manufacturer , the system weighs around 25.2 kg and features a top carry handle for transporting the subwoofer. A carry bag for the column and spacer bar is included. The EVOLVE 50M G2 is available in black or white.