The Audio-Technica AT-LPW40WN is a fully manual belt-drive turntable on an anti-resonance MDF plinth with simulated walnut veneer. It plays 33-1/3 and 45 RPM records and outputs PHONO or LINE through a built-in switchable preamp.

Tonearm and Drive

A static-balanced straight carbon tonearm (effective length 223.6 mm / 8.80") carries an AT-HS4 headshell and AT-VM95E cartridge (0.3 x 0.7 mil elliptical). The DC servo motor uses Active Speed Stabilization. Hydraulically damped lift and adjustable anti-skate are included.

Specifications

• Drive: Belt drive, fully manual
• Motor: DC servo with Active Speed Stabilization
• Speeds: 33-1/3 and 45 RPM
• Platter: Die-cast aluminum
• Wow and flutter: <0.15% WRMS (33 RPM) at 3 kHz
• Signal-to-noise: >60 dB
• Cartridge: AT-VM95E Dual Moving Magnet (0.3 x 0.7 mil bonded elliptical), pre-mounted on AT-HS4 headshell
• Replacement stylus: AT-VMN95E
• Tonearm: Static-balanced straight carbon; effective length 223.6 mm (8.80"); overhang 18.6 mm (0.73")
• Tracking force: 0 to 3 g adjustment; cartridge standard 2.0 g (1.8 to 2.2 g)
• Applicable cartridge weight: 12 to 17 g including headshell
• Phono output: 4.0 mV nominal at 1 kHz, 5 cm/sec
• Line output: 200 mV nominal at 1 kHz, 5 cm/sec
• Phono preamp gain: 35 dB nominal, RIAA equalized (switchable PHONO/LINE)
• Power: 100 to 240 V, 50/60 Hz, 0.5 A max; AC adapter 12 V, 0.5 A
• Dimensions (W x D x H): 420.0 x 340.0 x 116.9 mm (16.53" x 13.38" x 4.6")
• Weight: 4.72 kg (10.40 lb), without dust cover

In the Box

• Dust cover and hinges
• Platter
• Turntable mat
• Drive belt
• Counterweight
• AT-HS4 headshell with AT-VM95E cartridge
• 45 RPM adapter
• RCA audio cable, approx. 1.0 m (3.3')
• AC adapter, approx. 1.5 m (4.9')