The dbx 1215 is a two-channel, 15-band graphic equalizer with 2/3-octave bands on ISO center frequencies. It is built for demanding sound reinforcement and installed systems, with straightforward controls in a 2U steel and aluminum chassis.

The 45 mm center-detent faders work over a selectable ±6 dB or ±15 dB range. Each channel has ±12 dB of input gain and a switchable 40 Hz low-cut filter. XLR, 1/4 in. TRS and barrier strip connectors ease installation, and a chassis/signal ground lift helps isolate hum. A hard-wired relay bypasses the unit when the power is off and waits 2 seconds after power-up before switching back in.

Features

  • Two channels of 15-band, 2/3-octave equalization on ISO center frequencies
  • 45 mm center-detent faders
  • Switchable ±6 dB or ±15 dB boost/cut range
  • ±12 dB input gain range
  • Switchable 40 Hz, 18 dB per octave Bessel low-cut filter
  • Electronically balanced inputs and servo-balanced outputs
  • RF-filtered inputs and outputs
  • XLR, 1/4 in. TRS and barrier strip connectors
  • Chassis/signal ground lift
  • Internal power supply transformer
  • Power-off hard-wire relay bypass with a 2-second power-up delay

Specifications

  • Channels: 2
  • Bands: 15 per channel, 2/3-octave, ISO centers
  • Input Connectors: 1/4 in. TRS, female XLR (pin 2 hot) and barrier strip
  • Input Type: Electronically balanced/unbalanced, RF filtered
  • Input Impedance: 40k ohms balanced, 20k ohms unbalanced
  • Maximum Input Level: More than +21 dBu, balanced or unbalanced
  • CMRR: More than 40 dB, typically more than 55 dB at 1 kHz
  • Output Connectors: 1/4 in. TRS, male XLR (pin 2 hot) and barrier strip
  • Output Type: Impedance-balanced/unbalanced, RF filtered
  • Output Impedance: 200 ohms balanced, 100 ohms unbalanced
  • Maximum Output Level: More than +21 dBu into 2k ohms or greater; more than +18 dBm into 600 ohms
  • Bandwidth: 20 Hz to 20 kHz, +0.5/-1 dB
  • Frequency Response: Under 10 Hz to over 50 kHz, +0.5/-3 dB
  • Signal-to-Noise Ratio: More than 90 dB, ref. +4 dBu
  • THD+Noise: Less than 0.005%, 1 kHz at +4 dBu
  • Interchannel Crosstalk: Below -80 dB, 20 Hz to 20 kHz
  • Boost/Cut Range: ±6 dB or ±15 dB, recessed switch
  • Low-Cut Filter: 40 Hz, 18 dB/octave Bessel high-pass, recessed switch
  • Meters: 4-LED bar graph at -10, 0, +10 and +18 dBu
  • Power Consumption: 24 W
  • Power Connector: IEC receptacle
  • Rack Space: 2U
  • Dimensions (H x W x D): 3.5 x 19 x 7.9 in. (8.9 x 48.3 x 20.1 cm)
  • Weight: 8.5 lb (3.9 kg)

In the Box

  • dbx 1215 graphic equalizer
  • AC power cord
  • Operation manual
  • Registration card
  • Four rack mount screws and washers

EstadoNuevo (nuevo)
Productos nuevos son vendidos por tiendas oficiales o por el fabricante original e incluyen todo su empaquetado original.Más información
Marca
Modelo
  • 1215 Dual Channel 15-Band EQ
Acabado
  • Graphic
Categorías

La información de seguridad del producto se encuentra disponible aquí.

Sobre el vendedor

Blackout Audio

Toronto, Canadá
En Reverb desde:2023

Protección de Reverb

Devoluciones sencillas, transacciones seguras, asistencia personal

Más información

Pago seguro

Anuncios similares promocionados













Reseñas del producto

Reverb Gives

Tus compras permiten que algunos programas de música juveniles obtengan el equipo que necesitan para hacer su música.

Oops, al parecer se te olvidó algo. Por favor revisa los campos señalados en rojo.