Overview

The Genelec 4430A is a 2-way Smart IP installation speaker with a 5 in woofer and a 3/4 in metal dome tweeter, each driven by its own 50 W Class D amplifier. One CAT cable brings PoE+ or PoE power, Dante or AES67 audio and control from the network switch, and a balanced Euroblock input takes analogue line audio as well. The enclosure is recycled die-cast aluminium, and the speaker reaches 45 Hz (-6 dB) and 104 dB short-term SPL. Installers set the system up in Genelec Smart IP Manager software, and a public API connects it to house automation. It comes in black, white and RAW unpainted aluminium and is made in Finland.

Key Features

  • Single-cable install: PoE+ or PoE power, audio-over-IP and management share one CAT cable up to 100 m long.
  • Dante and AES67 input: Plays Dante and AES67 streams at 32 to 96 kHz and 16 to 24 bit, using one channel or the sum of two.
  • Analogue line input: A 3-pin balanced Euroblock input at 10 kOhm, configurable in Smart IP Manager.
  • Stored power for peaks: The internal power supply stores energy for audio peaks and reaches 104 dB short-term SPL at 1 m on PoE+.
  • Built-in room correction: 20 parametric filters, delay up to 98 ms and level alignment, stored in the speaker.
  • Controlled dispersion: DCW waveguide and MDE enclosure design, with 120 degrees horizontal and 100 degrees vertical dispersion.
  • Intelligent Signal Sensing: ISS drops the speaker to a 4 W standby when no audio is present and wakes it on an incoming stream or an API command.
  • Mounting: Rear M6 threads fit Genelec floor, ceiling, wall and truss accessories, and a keyhole wall bracket is supplied.

Specifications

  • Type: 2-way active Smart IP installation speaker
  • Woofer: 130 mm (5 in) cone
  • Tweeter: 19 mm (3/4 in) metal dome
  • Amplifiers: 50 W bass + 50 W treble, Class D (short-term)
  • Frequency response (±1.5 dB): 58 Hz - 20 kHz
  • Low / high cutoff (-6 dB): 45 Hz / 39 kHz
  • Max short-term SPL (1 m, PoE+): ≥104 dB
  • Max long-term SPL (1 m, PoE+): ≥96 dB
  • Max peak SPL (1 m, PoE+): ≥107 dB
  • Self-generated noise (1 m, A-weighted): ≤5 dB
  • Dispersion (H x V): 120° x 100°
  • Crossover: 2.9 kHz
  • Latency, analogue input to acoustic output: 2.3 ms
  • Network / audio input: 1 x RJ45, 100BASE-TX
  • Audio-over-IP formats: Dante, AES67
  • Stream format: 32 - 96 kHz, 16 - 24 bit
  • Analogue input: 3-pin Euroblock, balanced, 10 kOhm
  • Analogue input level for 100 dB SPL at 1 m: -6 dBu
  • Max analogue input: 24 dBu
  • Room EQ: 20 parametric filters, sensitivity -60 to 0 dB, delay 0 - 98 ms
  • Power: PoE+ (IEEE 802.3at) or PoE (IEEE 802.3af)
  • Power consumption: Idle 5 W, ISS standby 4 W
  • Max CAT cable length: 100 m (333 ft)
  • Enclosure: Die-cast aluminium, reflex port
  • Dimensions (H x W x D): 285 x 189 x 178 mm
  • Weight: 5.1 kg (11.2 lb)
  • Operating temperature: 15 - 35 °C
  • Finish: Black

In the Box

  • 4430A Smart IP Installation Speaker
  • Simple wall bracket (keyhole type)
  • Mounting screw set
  • 3-pin Euroblock connector for analogue input (inserted in the speaker)

Annonces similaires mises en avant













ÉtatNeuf (neuf)
Le matériel en état « Neuf » n'est vendu que par un vendeur autorisé ou un fabricant et inclut l'emballage d'origine.En savoir plus
Marque
Modèle
  • Genelec 4430A Smart IP 2-Way Installation Speaker (Black)
Finaliser
  • Black
Catégories

Des informations concernant la sécurité des produits peuvent être disponibles ici.

À propos du vendeur

Blackout Audio

Toronto, Canada
Membre de Reverb depuis:2023

Protection Reverb

Retours simples, transactions sécurisées, service client humain

En savoir plus

Paiement sécurisé

Reverb Gives

Vos achats aident les programmes de musique destinés aux jeunes à obtenir le matériel dont ils ont besoin pour faire de la musique.

Oups, il semblerait que vous avez oublié quelque chose. Veuillez corriger les champs affichés en rouge.