TREBLE BOOST ANALOG SIGNAL OPTIMISER CREBER INSTRUMENTS HAND BUILT VINTAGE STYLE

TREBLE BOOST
ORIGINAL HANDWIRED DESIGNS BY CREBER INSTRUMENTS. DEVON, ENGLAND.

THIS TREBLE BOOST IS A SIMPLE VOLUME BOOSTER WITH ACCENTED HIGHS AND MAINTAINED LOWS, PERFECT FOR BRIGHTENING-UP HUMBUCKERS OR ‘MELLOW’ PICKUPS, PUSHING OVERDRIVE EFFECTS, OR JUST ADDING A SUBTLE SPARKLE TO YOUR TONE.

STRENGTHEN AND MAXIMISE YOUR INSTRUMENT SIGNAL, BOOST FOR IMPROVED CLARITY & DEFINITION, PUSH YOUR VALVE AMP HARDER, STACK WITH OVERDRIVE AND DISTORTION DEVICES FOR MASSIVE TEXTURES, OR SIMPLY SQUEEZE A LITTLE MORE POWER OUT OF YOUR INSTRUMENT AND SUBSEQUENT EFFECTS.

BE SURE TO TRY THIS DEVICE IN VARIOUS POSITIONS WITHIN YOUR PEDAL CHAIN, TO ESTABLISH WHICH ARRANGEMENT GIVES THE BEST RESULTS. WE RECOMMEND PLACING IT FIRST THING, TO OPTIMISE AND MAINTAIN THE CLEAREST & FULLEST TONE BEFORE DRIVING THROUGH THE REST OF THE PEDAL CHAIN.

SPECIFICATION & FEATURES:

- TREBLE BOOST WITH LEVEL CONTROL. UNITY GAIN @ 11.00 (APPROX).

- GREATLY IMPROVES SIGNAL TO NOISE RATIO.

- EXTRA HIGH OUTPUT VOLUME FOR PUSHING VALVE AMPS & SUBSEQUENT EFFECTS.

- CAN BE USED AS A SIGNAL PAD/ATTENUATOR.

- POPLESS TRUE BYPASS SWITCHING.

- SUPER LOW-NOISE CIRCUIT DESIGN.

- GREAT WITH SINGLE COILS & HUMBUCKERS.

- 1/4" / 6.35MM INPUT & OUTPUT JACK SOCKETS.

- INPUT IMPEDANCE (APPROX): 1M

- OUTPUT IMPEDANCE (APPROX): ≤12K

- POWERED BY STANDARD 9V DC (NEGATIVE CENTER)

- CURRENT DRAW (APPROX): <1MA

- VINTAGE STYLE AMBER LED INDICATOR.

- REVERSE POLARITY CIRCUIT PROTECTION & POWER FILTERING.

- STANDARD 2.1MM POWER SOCKET FOR REGULAR PEDAL POWER SUPPLIES & DAISY-CHAINS. (BATTERY IS DISCONNECTED WHEN POWER JACK IS INSERTED).

- BATTERY CLIP OPTION INSIDE (POWER SAVING WHEN INPUT JACK IS ABSENT).

- SATIN VINTAGE-STYLE ACRYLIC FINISH.

- ROBUST & COMPACT DIE-CAST ALUMINIUM CHASSIS.

- FULLY SHIELDED UNIT TO ELIMINATE INTERFERENCE AND NOISE.

- COMPATIBLE BEFORE AND AFTER MOST OTHER EFFECTS UNITS - BUT LET YOUR EARS DECIDE!

- HAND WIRED & FINELY CALIBRATED FOR STUDIO-QUALITY TONE.


NOTE: THE OUTPUT VOLUME OF THIS DEVICE WILL OVERDRIVE THE INPUT OF THE NEXT DEVICE (IF SET TOO HIGH) CAUSING DISTORTION — OFTEN A DELIBERATE AND DESIRED EFFECT. TO KEEP SIGNALS DISTORTION-FREE, INCREASE THE LEVEL AND IDENTIFY THE POINT WHERE CLIPPING OCCURS, THEN ROLL IT BACK TO TASTE.

PLEASE NOTE: IN THE INTEREST OF CONSTANTLY DEVELOPING & IMPROVING OUR PRODUCTS, APPEARANCE, DESIGNS & FEATURES MAY CHANGE WITHOUT NOTICE.

CREBERINSTRUMENTS.COM
Our designs have taken inspiration from the original effects that produced the most iconic sounds of the 1950s, 60s and 70s. However, our devices are far from replicas; we use absolutely no pre-made or printed circuit boards, and all circuits are our own unique design. All Creber Instruments effect pedals are designed and calibrated to produce the absolute best studio-quality tones, with the robustness required to withstand even the heaviest-footed gigging musician. All components are soldered by hand using modern high precision & quality, low-noise analog components. We have dedicated years to calibrating our designs to achieve the best sound with greater stability, compatibility and reliability. Our chassis graphics are clear and simple, with no unnecessarily fancy artwork or gimmicky terminology; unless it improves the quality of sound, we like to keep it concise and to the point, just as it was in the good old 50s & 60s. These pedals are built primarily for guitar though, as with all things musical, there are no rules, so all of our effects work well with any instrument that can be connected with a ¼ inch jack - but let your ears decide!

All C.I. effect pedals are built upon order, hand made one at a time. Please allow up to 12 working days manufacturing time, PLUS (variable) shipping time.

All C.I. products include Free World-Wide Delivery, a 30 Day Satisfaction Guarantee and a One-Year Warranty.

THANK YOU FOR YOUR INTEREST! 

FOR MORE INFO, VISIT: CREBERINSTRUMENTS.COM