Maker: JHS Pedals
Model: Lucky Cat
Condition: New
Description:
The Lucky Cat Delay has basic controls consisting of Time, Mix, Ratio, Repeats, Darken (EQ), and a Modulation toggle. Time is a manual control for the length of the repeats up to 1000ms. Mix controls the volume of the repeats, from fully clean signal to fully wet. Ratio controls the subdivision of the tap tempo with options of quarter note, dotted eighth note, eighth note, and triplets. Repeats controls the amount of repeats you will hear, from one repeat to infinite. The Lucky Cat will not do analog delay oscillation, but will do a musical digital oscillation when the repeats are maxed out and you play with the Time control. The Darken control works as an EQ for the repeats only. When fully clockwise the tone of the delay is the fully digital, unaffected sound. As you turn counter-clockwise the delay will darken in tone giving you an array of delay tones at your fingertips. The Modulation toggle has two modulation settings, Mod 1 and Mod 2, with the center setting disengaging the modulation. Mod 1 is a subtle modulation that gives the delay just the right amount of movement without being overwhelming. Mod 2 is a deeper modulation that gives you a seasick sound for those parts you want drenched in modulation.
On the left side of the Lucky Cat, you’ll find a dip switch for Vintage Tape/Digital Clean tones. In Vintage Tape mode, you’ll find a more compressed slightly driven echo like vintage tape delays. In Digital Clean mode the echo is crisp and clean for those pristine and chirpy delay sounds. On the right side of the pedal, you’ll also find an external tap jack so you can control the tempo of your delay with an external tap pedal.
- 1000ms of classic digital delay.
- On board tap-tempo with ratio subdivision control.
- Two modulation settings.
- EQ control for the repeats.
- Tape/Digital modes.
- External tap jack.
- Diamond eyes.
If you’re wanting crystal clear digital delay that sparkles with features, the Lucky Cat will satisfy your craving.
This pedal requires standard 9V DC Negative power, consumes 75mA, and measures 2.6"x4.8"x1.6"
